• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Step up from 4BT?

dnewman9

Bronco Guru
Joined
Aug 12, 2003
Messages
1,305
My vote would be a 2.8 Powerstroke. They are like a hot rodded 300TDI. More pricey than a 4bt but more modern and only 1 wire hook up.
Last time this topic came up, someone on here mentioned they were in the process of converting an eb over with one?
Dennis
 

ztoolman44

Full Member
Joined
Jan 8, 2005
Messages
304
Loc.
Farmington, Utah
...and full width 1 tons installed. My newer dodge (07 common rail) has hydroboost also, cant remember if the old one did but I think so.
 

ncsubronc

Sr. Member
Joined
Nov 19, 2004
Messages
878
Depending on what I find, might just shorten the dodge chassis and throw the 4 door body on it.

I'm with ztoolman, this sounds like a winner to me. You're gonna be doing lots of custom body work anyway, why not build it around the frame and drivetrain that's already there?
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
As was said by someone else .You can tune up the 4Bt.. we have a friend here in town that does tractor pulling his is making over 900HP..What else you want.
..You ask on year models Dodge was 89 up until 97 1/2.
then Dodge changed over to the 24 valve.
...There is a lot of info in the search files over on 4btswap.com .

OR YOU CAN READ AND post for a year like i've done asking questions .. But their standard answer is .."HIT THE SEARCH BUTTON''.
....I give um Hell about that ..I say yes and that why their sight get 4 maybe answers to each post.. Where over here a good post it's nothing to have 40 answers ..
.........Another words you GUYS ROCK.......
 
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
As was said by someone else .You can tune up the 4Bt.. we have a friend here in town that does tractor pulling his is making over 900HP..What else you want.
..You ask on year models Dodge was 89 up until 97 1/2.
then Dodge changed over to the 24 valve.
...There is a lot of info in the search files over on 4btswap.com .

OR YOU CAN READ AND post for a year like i've done asking questions .. But their standard answer is .."HIT THE SEARCH BUTTON''.
....I give um Hell about that ..I say yes and that why their sight get 4 maybe answers to each post.. Where over here a good post it's nothing to have 40 answers ..
.........Another words you GUYS ROCK.......

Thanks PAPITT, it is a great site.
 

jpalmer

Sr. Member
Joined
Feb 15, 2008
Messages
436
Loc.
Boise, ID
I agree, then use the whole nv4500 and np231 or np241 setup.

I am running a NV4500 & NP241 behind my LSx & it is a great combo. The lower ratio in the t-case is nice (2.75ish). They are a chain driven case so you can't twin stick them, but they are stronger than hell.

I agree with using the Dodge chassis, much easier.
 
OP
OP
Tito

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
I am running a NV4500 & NP241 behind my LSx & it is a great combo. The lower ratio in the t-case is nice (2.75ish). They are a chain driven case so you can't twin stick them, but they are stronger than hell.

I agree with using the Dodge chassis, much easier.

You have any recent updates on your mileage? Did you drive or trailer down to the UnEvent?
 

Durtymax

Full Member
Joined
Aug 26, 2009
Messages
293
Okay, I have been doing some serious research and I think I am going to step up to the 6bt. I have a line on a cummins and a truck with a 5 speed as well. The only thing is.... it is a 93 so it has an intercooler. The only REAL problem I see is I would probably not have room to mount it..
 

regshawn

Bronco Guru
Joined
Feb 23, 2006
Messages
2,597
Loc.
Portland
Depending on what I find, might just shorten the dodge chassis and throw the 4 door body on it.

Why would you do that? Don't you know the only thing good on a Dodge desiel truck is the Cummins ............................and because Dodge didn't build it!!!:-X%)
 

HGM

Sr. Member
Joined
May 24, 2010
Messages
973
Loc.
Senoia, Ga.
Okay, I have been doing some serious research and I think I am going to step up to the 6bt. I have a line on a cummins and a truck with a 5 speed as well. The only thing is.... it is a 93 so it has an intercooler. The only REAL problem I see is I would probably not have room to mount it..

Might want to check a price on the Ford 6.7L intercooler. Its air to water and about twice the size of a battery. You could put it about anywhere.. Might have to play with the cooling system for it though.. Even the '03 Cobra had a remote air to water cooler with its own pump.. Got a couple of options if you wanted...
 

AWS

Sr. Member
Joined
Aug 2, 2004
Messages
596
Loc.
ST LOUIS
I've got a 300 six sitting in a bronco frame and the block measures right at 28-1/2" and I also measured a 6bt block I have, it is 29-3/4". The 4bt block measures right at 20" which is shorter than a 302 block.
Steve
 

grant_71

Bronco Guru
Joined
Aug 6, 2002
Messages
1,936
My thought on this....

The 6.9 was prone to cracking heads, they ran anyway, my buddy cracked heads areoun 20k, and 25K miles, and drove the truck to 173k just like that. It was the body that gave out.

If you are going diesel bigger than a 4bt, you are going to need to do some serious frame strengthening. You probably already know this, But anywhere stuff bolts up will be putting a lot of stress on the thin wall tube they used. Not just motor mounts but all the front suspension mounts as well

Upgrade your brakes, that is a lot more weight to stop.

Just my 2...er 3 cents
 

jpalmer

Sr. Member
Joined
Feb 15, 2008
Messages
436
Loc.
Boise, ID
You have any recent updates on your mileage? Did you drive or trailer down to the UnEvent?

I actually dropped a little when I stepped up to 4.10s, but I was still hitting over 20 on the freeway with my 35"s. I just stepped up to 37"s & 17"s so I haven't had a chance to verify mileage yet, but I'm guessing it dropped to just below 20mpg. I average around 18mpg on a tank mixed freeway & city.

I trailered down to the Un-Event.
 
Top