TN Super Celebration EAST Parts Sale/Buy/Swap

[Irishjig13]

Super Celebration

Good morning, I too will be bringing a trailer load of parts to the Swap Meet area. Of note I have a brand new Krawlers Edge Early Bronco Sport Cage complete with mounting hardware and seat belts. Asking price $1700 which is what I paid. It is located in Melbourne, Florida and I'm willing to bring it to SC.

I also have a brand new set of 4 LT315/75R16 BF Goodrich T/A KO2 mounted on aluminum eight hole rims with a 5th rim and tire mounted. $1500 for the set of 5.
OR
a set of 4 ProComp 33/12.50R15LT on deep dish aluminum rims. $1200.

I will try and update this list later this evening. I can supply photos via email or text. Please contact me for additional information.

Thank you,

Kevin

 

[beasterly]

I need eyebrow grill and 66 rear seat and 6cyl oil bath air cleaner.

 

[Tugross302]

My wife made these and is planning on selling them at SC. I’m trying to get on her good side so I’m posting it for her.

 

[Bronco John]

Anyone interested In a factory 2 barrel intake manifold from 74 302?

 

[77silver ranger]

Super Cell parts wanted for EB

Looking for nice heater intake box (pass side under hood) no cracks or paint (from poor masking for repaint) . Not looking for reproduction . Also NOS or very nice body side mouldings for door , pass quarter (w/spare) and moulding for tailgate . May have something you need for trade or will purchase . Plan to be at SC Fri and for sure Sat. Thanks !

 

[70EarlyBronco]

James Duff 3.5 inch (heavy) leaf springs, put them on last fall but decided to go down to 2.5s. Asking $400 for the pair new are $589.95. I will also be pulling a tired but running 289 out of a 68 bronco if anyone is interested.

 

[BajaFresh75]

You said back on 3/13 in this post that you were going to post pictures of the 5x16 rims and other stuff you had for sale. Are you going to do it or not ?

Sold the rims sold right after I posted on 3/13. I have not had time to list any parts. Is there something you need?

 

[gpeplau]

EDIT: SOLD
Rock slider pair never installed from toms bronco parts. $170
Will be at SuperCel on Friday and Saturday. Must have contacted me about purchasing before SuperCel or I will not bring them to it. Please text me @ 770-380-1501 because I rarely check the forum.
Thanks, Geoff

 

[UNCbronco]

Sold the rims sold right after I posted on 3/13. I have not had time to list any parts. Is there something you need?

You said you found the one bench seat hinge cover, did you ever find the other one ? I am still interested in buying them. Thanks

 

[Sporto]

For sale I’ll bring to super celebration.
6 Turn PS box. Worked when pulled. Could use a rebuild. $350
OEM PS pump. Rebuilt. Works. $25
Brand new OEM radio antenna kit $80. NIB
65 amp v belt alternator. Fresh rebuild. $40
3 passenger vent window glass with stainless frames, one drivers side and two frames. One passenger side has a good pivot bolt. Mostly
Parts, but a good starT To a rebuild. Take it all, $40.

Probably find other stuff to bring.

Pm me if interested, I’ll bring it

Rich

 

[genteca]

James Duff 3.5 inch (heavy) leaf springs, put them on last fall but decided to go down to 2.5s. Asking $400 for the pair new are $589.95. I will also be pulling a tired but running 289 out of a 68 bronco if anyone is interested.

Interested in 3.5 leaves

 

[jonmelton]

1974 Parts

I took apart my 1974 suspension, axles, motor and transmission - 3 speed manual. I never drove or ran anything. I'm keeping the engine, but could part with just about anything else.

email me: nashvilleearlybronco@gmail.com

 

[gpeplau]

Original 3 spd Transmission from a '75 302. $150. Text 770-380-1501

 

[Tiko433]

A few smalls I will be bringing
Aftermarket transmission dipstick the flexible one with the braided hose that you mount to the firewall -10
2-Duffs duel shock mount (Front) -25
2-Duff shocks 5 1/2 inch lift two of them Eye to Eye -25
Head light harness... the one with the relays to take load off switch -25
Two Full Size Bronco spare Tire carriers
PM me is you have any questions...

 

[70EarlyBronco]

Parts for Super Celebration

Stock Radius Arms- $20
Used fold and tumble rear seat- $80 pending
JBA Shorty headers for 302 - $80 sold
Tube steps - $20
28oz flywheel $60
50oz flex plate $10
Dana 44 cover $5
James Duff 3.5 inch leaf springs (heavy) $400
Front bikini top with hardware pending
Rear gas tank skid plate $5 Sold
Optima battery tray $10 sold
Grill - $125 sold
Sherman 23 gal tank $400 sold
James Duff track bar drop bracket with bushings $30. Sold

 

[Jsarmst]

Stock Radius Arms- $20
Used fold and tumble rear seat- $80
JBA Shorty headers for 302 - $80
Tube steps - $20
28oz flywheel $60
50oz flex plate $10
Dana 44 cover $5
James Duff 3.5 inch leaf springs (heavy) $400- pending
Front bikini top with hardware
Rear gas tank skid plate $5
Optima battery tray $10
Grill - $125
Sherman 23 gal tank $400
James Duff track bar drop bracket with bushings $30

I'll take the fold and tumble seat

 

[p butler]

Half cab top

I have a half cab metal top that needs work.
I would like to trade my top and some extra cash
For a good full top. Also need a 72 air filter Assembly
And the two u bolts for the factory sway bar.

 

[UNCbronco]

Stock Radius Arms- $20
Used fold and tumble rear seat- $80 pending
JBA Shorty headers for 302 - $80
Tube steps - $20
28oz flywheel $60
50oz flex plate $10
Dana 44 cover $5
James Duff 3.5 inch leaf springs (heavy) $400- pending
Front bikini top with hardware
Rear gas tank skid plate $5 Sold
Optima battery tray $10
Grill - $125
Sherman 23 gal tank $400
James Duff track bar drop bracket with bushings $30

How old is the 23 gal tank ? What is it set up for ? Could I see some pictures of it ? Could you please send them to my phone 336-516-6573 Thanks

 

[lilthom]

transport to Missouri if needed

I can't remember if I shared that I will be able to bring some parts back to the Springfield, Joplin, Stockton area in Missouri. I am leaving out Friday morning and will be in Springfield on Saturday. I can leave parts in Lockwood, Mo to be picked up at any time.
Let me know if I can help.

 

[Teal68]

Ford EFI

$50 Ford EFI complete:
Upper and lower intake, injectors, dizzy looking thing, coil, spark distribution looking thing, complete harness, and computer.

$10 full-size euro looking tail lights