• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ted Nugent 1966 HalfCab Build Thread

Status
Not open for further replies.

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
Add power take off and a side mounted post hole digger. He's got enough trick Bronco's, time to make a trick farm truck that does remote work. Good roll bar with a swing boom crane all hydraulic with hydraulic winches. Add a good military trailer and go to work truck.
 

SGM_JakeAlex

Contributor
Sr. Member
Joined
Sep 7, 2009
Messages
690
Loc.
New Albany, MS
Marking this thread so I can keep track of it. Should be fun to watch.

I'd say around 2.5 to 3.5 suspension, uncut on skinny 31s (or 32s) with good grip (km2 or tsl sx). For goodness sakes not zebra print. If black, maybe flat black since he already has a great looking shiny black full cab. Although....I think a desert tan with black wheels, & flares, and an OD green top would look good as well as satisfy his proud military bone. I could see OD green American flags painted under each side bronco emblem as well.... Just my opinion but I'd dig it.

Good luck with it and do keep us informed.
Jake

Something else to think about is that he had surgery here a year or so back. Can't remember if it was his knee or hip but at any rate, if an exterior type cage was done, I think it would be a great option to have a swing out/away deer/hog hoist. Something that could be used to lift heavy game so it could easily be placed in the bed while also being able to be stowed/latched back so it's not in the way or so it doesn't take away from the vehicles look. Also, I do agree that AC would be good for him while in TX. The more comfortable and useful his EB is, the more he will use it.....as well as he might display it more on TV for us all to enjoy.

And it would be pretty sharp if he checked this site out so he could see how much we all appreciate him standing up for our military, hunters, and of course the Early Broncos...

- Jake
 
OP
OP
buildabronco.com

buildabronco.com

Full Member
Joined
Jun 30, 2010
Messages
348
Loc.
Tekonsha, Mi
Great Ideas!!! I will try and pass this on to Ted. Keep checking back as we are just working out some of the details now before we tear into it.
 

gbkeith

Jr. Member
Joined
Nov 27, 2010
Messages
59
Loc.
Lubbock, Texas
I'm really digging the idea of a 300 I6 in this thing. It's a workhorse, it's almost something that belongs in there even though it was never offered. It's retro cool. Plus, after a little searching it turns out that there is this whole underground community of guys putting small block chevy rocker arms and 351 pistons in them to get better performance. You know those guys are listening to Stranglehold at some point while they do that.
 
OP
OP
buildabronco.com

buildabronco.com

Full Member
Joined
Jun 30, 2010
Messages
348
Loc.
Tekonsha, Mi
I have thought about the Camo Wrap Idea too. I think it would be very cool. The last Camo Wrap we did turned out great. And yes "Stranglehold" and "Cat Scratch Fever" has made its way to the stereo a few times already.
 

4x4jumper

Jr. Member
Joined
Feb 16, 2009
Messages
137
digital camo wrap, inline 6, 33-35s, custom rear fenders that are cut but look uncut.
 

4x4jumper

Jr. Member
Joined
Feb 16, 2009
Messages
137
Last edited:

HGM

Sr. Member
Joined
May 24, 2010
Messages
973
Loc.
Senoia, Ga.
(PLEASE NOTE THAT NONE OF THE 550 PICTURES (AND GROWING) ARE ANY OF MINE, THIS IS MY ALBUM OF ONE I HAVE COLLECTED/ING!)

1st photo is of bax's bronco (sweat bronco btw)
2nd photo i from bg

here is the links:

1.

https://picasaweb.google.com/lh/photo/vx5L0Ng5FXYua7H5ZUgTlDYEVvrf1qL1sks4hku02xg?feat=directlink


2.

https://picasaweb.google.com/4x4jum...vcyJqJmgE&feat=directlink#5584671252124428226

I really like that look... Although I've seen many pic's of Bax's truck, I never got a clear vision of how it was done until I saw your pic #2.. Very cool..

My idea of cut, but uncut looks something like this... Not mine either, but very nice..
 

Attachments

  • Quarters.jpg
    Quarters.jpg
    49 KB · Views: 234

4x4jumper

Jr. Member
Joined
Feb 16, 2009
Messages
137
I really like that look... Although I've seen many pic's of Bax's truck, I never got a clear vision of how it was done until I saw your pic #2.. Very cool..

My idea of cut, but uncut looks something like this... Not mine either, but very nice..

indeed it is very nice... seen a few of those.... but now i have another pic in my album!

lol

thanks for sharing
 
OP
OP
buildabronco.com

buildabronco.com

Full Member
Joined
Jun 30, 2010
Messages
348
Loc.
Tekonsha, Mi
I love the "cut,uncut look" We will for sure be doing that it the future. Talked to Ted today and looks like we will be doing what I would call a mild "resto-mod" For sure going to stay uncut and mild lift. Complete body off, but will remain mostly stock. Lots more details to work thru but that is the plan so far. Should be very cool and clean. Cant wait to start tearing into it!!!!!
 

DevilDog

Sr. Member
Joined
Jan 26, 2011
Messages
444
Loc.
Virginia
I am concerned that nobody has brought up the idea of having Mr. Nugent run for president in 2012. I for one would love for the presidential vehicle to be known as Bronco One. Priorities people...priorities.
 
Status
Not open for further replies.
Top