• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Temp Sensor & Timing Cover Question

kiteoregon

Full Member
Joined
Nov 21, 2011
Messages
292
In this pic of the temp sensor, is there some sort of adapter or different location. This new distributor is sitting right on top of it. The temp sensor is not all the way seated, but i think it will still be a problem.

If the second pic, what do i need to do with this hole in the timing cover, should i just plug it?

Thanks.
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
Pretty sure the hole is a blind hole and is fine as is.

You can move the temp sensor to the passenger side if not using a heater. Some intakes also have a rear location you can use, anything that plugs into the water jacket.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
What's that sensor for? Looks like you're going to be running without the Explorer EFI? Is that for a digital dash, or some other electronic fanciness? Just wondering because that's certainly not a temp sensor for a stock EB instrument.

Paul
 
OP
OP
K

kiteoregon

Full Member
Joined
Nov 21, 2011
Messages
292
It won't be EFI. What should the temp sensor look like? I am guessing the one i have is for EFI and a computer. I probably need a temp sensor that is the single wire type.
 
Last edited:

savage

Bronco Nut
Joined
Apr 18, 2007
Messages
2,483
Loc.
Renton
Do you have a gauge or a light? The sender unit you get, will depend on the type of gauge. This is what it looks like. The one smokinjoe,shows should work.
 

Attachments

  • engine new stuff 005.jpg
    engine new stuff 005.jpg
    109.8 KB · Views: 84

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
That's the EFI coolant temp sensor:

lrs-12648a_3492.jpg


Typically that's installed in the heater tube, or in place of the heater tube if not using one.




What you need for stock instrumentation is the temperature sending unit. Thats the sensor that typically occupies that space:

sw2328_8388.jpg
 
Top