• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Third times a charm v3.0

GloNDark

Sr. Member
Joined
Aug 22, 2007
Messages
399
Man this is a good looking build. Can't wait to see how those shock towers/inner fenders/rear seat turns out. I want to 4 link the back of my 73 so bad but the rear seat has stopped me. Now I'm thinking it's possible.......hhmmm
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Man this is a good looking build. Can't wait to see how those shock towers/inner fenders/rear seat turns out. I want to 4 link the back of my 73 so bad but the rear seat has stopped me. Now I'm thinking it's possible.......hhmmm

I wasn't sure myself, but now I believe it is possible. I gave some dimensions to my brother and he made a rendering of the inner fenders. I'll send the file to a shop and have them cut out soon. I will end up boxing in the strut towers.
 

Attachments

  • image.jpg
    image.jpg
    110.6 KB · Views: 105

miikee73

Shadetree Guru
Joined
Dec 14, 2010
Messages
3,551
Loc.
Aloha
Lookin good, that's what you call progress. Won't be long and you can move your thoughts to the front. Will the front be as involved as the back?
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Lookin good, that's what you call progress. Won't be long and you can move your thoughts to the front. Will the front be as involved as the back?

Thanks Mike! I loaded the axle up so I can take it to the powder coated on Monday. I put the front under the Bronco today so I can get started. The front is more involved, but I learned a lot on the rear so I'm hoping it goes quicker.
 

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
Definitely making a lot of progress bud and it looks great let me know when you get the wheel tubs. Did you decide not to go with the ones Andrew had?
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Definitely making a lot of progress bud and it looks great let me know when you get the wheel tubs. Did you decide not to go with the ones Andrew had?

I sent out a few emails requesting quotes for the fenders my brother created for me. I think replacing the full wheel well will be easier. I'll let you know.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
Cool sounds good

I was able to get them cut out and they are being bent up today. I'll be in the garage all day on Friday getting the rear installed and then moving on to the front. Come over if you want to hang out.
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
I got the steering box moved forward a few inches. I will be able to finish it up when the Bronco is on the ground. The bumper is in the way and can't remove it because it is sitting on the stands I built. 1/4" plate on both sides with DOM sleeves between the frame.

F421E523-00A8-4D56-A070-CC1503588F07_zpsr9afymd5.jpg


To get the 5.5" up-travel I wanted, I needed to roll the upper link mount to the rear a few degrees so it didn't contact the motor mount.

AE2068D6-24B9-413F-B837-A09B08E0EF2D_zpshtdcore9.jpg


I was able to get my trac bar and drag link perfectly aligned and within an inch or two of being the same length. I'm hoping I won't have any bump steer with this setup.

27BABAA4-E410-43DB-AFE2-AE447E4D16B5_zpshnjllqsn.jpg


Full bump looks good. I could move my axle forward another inch if I wanted to, but I would have to get creative with the upper link mount.

5985C9D8-896A-4D61-B5E8-3943B17A335C_zps7sgywiq1.jpg


My upper link mount was hitting my starter before I achieved full bump so I put a 15* bend in it. 1.75" DOM with a 1.5" DOM internal sleeve that runs almost the full lenght. I left the inner a little short so my tube inserts would fit.

IMG_2896_zpsf7hj7brx.jpg
 

5001craig

Contributor
Bronco Guru
Joined
Nov 3, 2013
Messages
1,180
Awesome thread. I just tried to rate it and couldn't because I already rated it before. Lol
 
OP
OP
JSmall

JSmall

Bronco Guru
Joined
Feb 18, 2004
Messages
3,224
A little bling from Tom Wood's. 1310 CV with a 1350 slip yoke. 1310 CV until I can get an Atlas.



I'm finishing up the front. I have to weld in the strut mounts and then burn all the brackets in.





 
Top