• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Thunderbird caliper uggrade.

markatherton

Sponsor/Vendor
Bronco Guru
Joined
Aug 11, 2004
Messages
1,978
What year thunderbird caliper is used for the disk brake upgrade. I have one here in my shop and need to buy new brake hoses. Don't know what to buy...Mark in San Diego, Beach City Broncos
 

dmoses42

Contributor
Bronco addict
Joined
Jan 25, 2017
Messages
656
Loc.
Chatsworth, Ga
Most Ford/Lincoln/Mercury Full size cars from 1972 to 1979 for the calipers. If you are looking for rubber hoses, I bought Speedway Motors part # 6178568 kit, but you can't use the banjo bolts, you'll have to find some 7/16-24 ones if you don't have them. And if you haven't already done so, you'll have to grind the lip off of the caliper for the hoses to seat. Hope this helps.
 

dmoses42

Contributor
Bronco addict
Joined
Jan 25, 2017
Messages
656
Loc.
Chatsworth, Ga
And if it is a '76 or '77, you'll have to have brake line adapters to go from the 7/16 hard line to the 3/8 rubber hose. I haven't found any hoses that are 7/16 on both ends that aren't custom.
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,763
Loc.
CA
I bought the ‘79 from Napa.
ADC 2240XA
ADC 2240XB

I did cut the ridge on one but realized after it was unnecessary (for my ‘76). Also, I slipped and sliced the dust boot, which sucks and I had to buy a dust boot and do more work to put the new boot on.

IMG_5513.jpeg
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,763
Loc.
CA
And if it is a '76 or '77, you'll have to have brake line adapters to go from the 7/16 hard line to the 3/8 rubber hose. I haven't found any hoses that are 7/16 on both ends that aren't custom.
Yes, GREAT heads-up! I bought some hoses someone mentioned worked from Amazon and never tried them until I was assembling and yeah no go so I just ended up cutting and redoing my hard line ends instead. Prob better in the long run.
 

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
dont you have to change the master cylinder too? if you had stock 76/77 disk
 

BroncoJimbo

Contributor
Long-term owner
Joined
Jun 11, 2014
Messages
291
Loc.
North GA
I did this conversion 20+ years ago and took the opportunity to upgrade the brake lines to SS.
 

Jdgephar

Bronco Guru
Joined
Sep 25, 2012
Messages
1,526
dont you have to change the master cylinder too? if you had stock 76/77 disk
You might need an adjustable proportioning valve. On mine, the rears would lock up first. It's definitely not good for a panic stop situation (spun me sideways). It's all good now though.

I used these hoses (the banjo bolt is wrong, you will need 7/16-24)

https://www.amazon.com/dp/B01MTY8XX5/?tag=classicbroncos-20

Sent from my SM-S916U using Tapatalk
 

spap

Bronco Guru
Joined
Jan 2, 2010
Messages
2,642
Thanks, I’ve in one of those little fun spins too with stock brakes before I got them dialed in
i thought if you didn’t go bigger the pedal was mushy. I guess do it and see how it goes
 

Timstrk

Full Member
Joined
Apr 8, 2014
Messages
198
Another thing you will find out. These calipers will need to be rotated bottom up to get the bleeder at the top. Otherwise you'll never get the air out of them. Just look how they line up in the bracket and where the bleeder is located. Take them loose and rotate the bleeder to the top. Took me a hot minute to figure this one out.

Tim
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,763
Loc.
CA
Another thing you will find out. These calipers will need to be rotated bottom up to get the bleeder at the top. Otherwise you'll never get the air out of them. Just look how they line up in the bracket and where the bleeder is located. Take them loose and rotate the bleeder to the top. Took me a hot minute to figure this one out.

Tim
I’m not there yet either, but this isn’t good enough?
 

Attachments

  • IMG_2307.jpeg
    IMG_2307.jpeg
    145.9 KB · Views: 88

Kbpony

Sr. Member
Joined
Jan 31, 2012
Messages
386
Sorry for the stupid question, but are the T-bird calipers superior to the stock calipers on the ‘76-77?
 

ba123

Contributor
Bronco Guru
Joined
Oct 29, 2022
Messages
2,763
Loc.
CA
They are same on the outside with a larger piston on the inside.
 
Top