• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Tom's Rocker guard/step Install modification

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
So a while back I purchased Tom's Bronco Part Rocker guard/nerf steps. Great product, really beefy, nicely built, the welds are great, overall I'm really happy with them....but....I didn't like the idea of just screwing them to the sheetmetal of the rocker, and they say to not use them as a step in the instructions....so I modified the installation a bit, and now they aren't going anywhere.

What I did:

1. Get a piece of 1/4" plate steel 5" wide cut to fit in the inside of the rocker panel.

2. Mark and drill the top bolts all the way through the rocker and 1/4" plate.

3. Mark, drill and tap the bottom bolts into the 1/4" plate.

4. Weld the 1/4" plate to the inside of the rocker, through bolt the top bolts with nylok nuts, install the bottom bolts with lock washers.

Now, the all the bolts are pulling against a 36" x 5" piece of 1/4" steel that is welded to the body, don't think it is going anywhere! If I notice any flex in it I will build a frame tie to the 1/4" plate.


DSC01301.jpg
 

c-gallagher

New Member
Joined
Jul 27, 2010
Messages
19
Hey looks really good I have some that i haven't put on yet and was thinking of doing something like that. Could you post a pic of what it looks like from the back?
 

GrillMaster

Contributor
Bronco Guru
Joined
Jun 5, 2008
Messages
2,505
Nice work! Got any pics of the backside? Can you access the inner rocker without cutting? This is next on my list.
 

buckn74

Jr. Member
Joined
May 2, 2010
Messages
80
Loc.
Monroe, WA
idea

Thats a great idea, i'll have to remember that when i install mine later.
I'm trying to decide if i should leave them black or paint them my body color. since my top and fender flares are white.
 

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
I have been waiting to buy a set because I have been wondering how to make it strong enough to use as a step looks great I would second the picture from the back
 

jpalmer

Sr. Member
Joined
Feb 15, 2008
Messages
436
Loc.
Boise, ID
That turned out great Wyle. Let's make sure to go test them this weekend at Walker. Who's garage is that ? It can't be yours, I can actually see the concrete. :p
 
OP
OP
WyleCoyote

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
I'll get pics from the back tonight. I already sprayed it with undercoating, so it might be hard to see what I did though.

By inner rockers I am talking about the normal inner panel of the rocker, so no cutting involved, just need a long 5/16th drill bit to punch the holes through from the outside. The PS I drilled the holes with the plate in place, that really sucked, so the DS I drilled through the rocker, used that to mark the plate, then drilled it on the drill press. That went much quicker.
 

DanWheeler

Bronco Guru
Joined
Nov 8, 2005
Messages
2,572
Loc.
Kirkland, WA
looks awesome. Hard to believe they would sell those and not expect people to step on them.

now i'm kinda torn between building sliders that attach to the frame or just picking up a set of those and re-inforcing them like you did.
 
OP
OP
WyleCoyote

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
looks awesome. Hard to believe they would sell those and not expect people to step on them.

now i'm kinda torn between building sliders that attach to the frame or just picking up a set of those and re-inforcing them like you did.

You could do a hybrid - buy these then box them in and attach them to the frame.
 

dualsport

New Member
Joined
Apr 1, 2008
Messages
27
Loc.
Northern Nevada
Mine are tied into the frame in three places as part of my cage tie-ins. My fab guy also tied the back one into the spring perch for the rear leaf as he said he has seen a perch fail before. Mine are solid now!
 
OP
OP
WyleCoyote

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
Mine are tied into the frame in three places as part of my cage tie-ins. My fab guy also tied the back one into the spring perch for the rear leaf as he said he has seen a perch fail before. Mine are solid now!

Can you get pics of the frame tie-ins for me?
 

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
Ya I did something similar to mine!

...I think Tom's should offer a kit as an option to make them work as steps!
 
OP
OP
WyleCoyote

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
Here are the pics from the inside. You can see the plate and bolts. What you can't see is the plate sits on a lip on the bottom.

DSC01321.jpg


DSC01320.jpg
 

1971BroncoSport

Full Member
Joined
Dec 23, 2008
Messages
204
I mounted mine with countersunk stainless steel socket headed bolts. On the backside I used three inch body washers to distribute the weight against the back of the rocker panels. They are strong and work well as a step.
 

Attachments

  • P8240006.jpg
    P8240006.jpg
    91.6 KB · Views: 102
  • P1010060.jpg
    P1010060.jpg
    78.2 KB · Views: 99
  • of=50,590,393.jpeg
    of=50,590,393.jpeg
    94.8 KB · Views: 157

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
I mounted mine with countersunk stainless steel socket headed bolts. On the backside I used three inch body washers to distribute the weight against the back of the rocker panels. They are strong and work well as a step.

..Nice...so what are you using for the grip on the guards? I am using some gray grip tape!;D
 
OP
OP
WyleCoyote

WyleCoyote

Bronco Guru
Joined
May 2, 2002
Messages
1,739
I do like the countersunk bolts, I'm just using regular stainless bolts...

I have mine coated in DIY bed liner, they seem to have enough texture to not be slippery.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
I think the backing plate idea is great. Looks like it should work well
I don't really think Tom's, or anybody else that makes this kind of protection, is saying that the thing is "not strong enough" to act as a step. It's their decision to stay in business and avoid losing any lawsuits when someone trashes their ankle, leg, knee and forehead, when they try to use it as a step and fail miserably.

I'm thinking that if they figure it's strong enough to keep the rocker protected when 4500 lbs of Bronco is pivoting on, or falling down over a rock, it's strong enough to hold the owner's weight.
No matter how big you are.
They simply don't want you thinking that bar is there to be a step, and turning it into a foot-trapping, ankle-biting, head-banging slalom board.
I'm also guessing they don't supply grip tape with the kit? If not, that's probably why.

Paul
 

rekoj71

Sr. Member
Joined
Apr 18, 2009
Messages
361
The first time I saw those I wanted them, and of course to use them as steps, and I think that the warning was added for some reason later after they were released, cause I don't remember that from the first time I saw them. How are they regularly mounted? If it's sheetmetal screws then I would see the need for the warning, or maybe it's considerd to small to be a proper step. My idea was also to use through bolts backed by plates or large washers but wasn't sure if it was the mounting or the design that made it not suitable for a step. I don't have any yet and am debating between these and a regular set of nerf bars. I like the looks of these better but I want to be able to step on them.
 

matt w

Bronco Guru
Joined
Jun 12, 2007
Messages
2,799
I bought the TOMS. I mounted them with sleeves/tubes that have a small plate welded to the interior side, the tube has a tapped fitting. I then drilled holes 1 inch round into the rocker panel from both sides. I then mounted the step with the sleeves! SO NO WAY will anything move those STEPS! You could lift my truck buy these puppies...Ya I didn't like the sheet metal screw deal & I know Toms needed to make it sellable to the average consumer that does not have the ability to weld, etc. These STEPS are one of my best and favorite upgrades! ;D
 
Top