• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

transfer case rear sliding gear question

bushman_22

Jr. Member
Joined
Jul 22, 2010
Messages
132
Loc.
Aloha, OR
while tearing down a j-shift I found that the rear sliding gear had a broken tooth. I tore down the bad one to steal the rear sliding gear from it. The one with the broken tooth is a 18-8-65 the other one is an 18-8-58. Does anyone know that the difference is?

Thanks
Bushman
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Both are J gears. The later version has this bevel cut into the splines, probably to help with gear engagement. No problem swapping them.
 

Attachments

  • Bronco 105m.JPG
    Bronco 105m.JPG
    141.6 KB · Views: 64
Last edited:
Top