Transfer Case T-Handle length

[malibubronco]

What is the length of the T handle Transfer Case Shifter rod?

Thanks

 

[DirtDonk]

Overall? Or just the part sticking through the floor?

 

[DirtDonk]

Trying to make one from scratch?

 

[malibubronco]

Trying to make one from scratch?

Just the stick itself. Reason I ask is I believe the PO may have shortened it. It does not stick up as high as others I have seen. The truck is not raised at all. Thanks for your help!!

 

[DirtDonk]

Gotcha. I think I remember that from thread a week or two ago. That was you?
I think you said it had no body lift, but did you verify that? Body cushions/insulators should be 3/4 of an inch tall.
Anything over that is a body lift. Any obvious spacers, of course is a body lift.

 

[malibubronco]

Gotcha. I think I remember that from thread a week or two ago. That was you?
I think you said it had no body lift, but did you verify that? Body cushions/insulators should be 3/4 of an inch tall.
Anything over that is a body lift. Any obvious spacers, of course is a body lift.

Yes, that was me. The one on my truck is 6.5 inches in total length including the t handle.

Thanks!

 

[Oldtimer]

About 14-7/8" from T handle to pivot bolt.

 

[malibubronco]

About 14-7/8" from T handle to pivot bolt.

View attachment 924842

Great! Thanks for your help. Mine was obviously shortened at some point...