Transit van 6R80

[Joe473]

Has anyone attached a transfer case to a 2015-2019 transit van 6r80? It appears the 2wd transit van case is cast to mount a transfer case vs the 2wd f150/mustang 6r80 which has no mounting provisions.
Any modifications to the main shaft or tumblin adapter for the transit van 2wd case vs f150 4wd case?

 

[Broncobowsher]

All the adapters I know of only fit the V8 bellhousing (V8 transmission only). I know for a fact that Ford never sold the Transit with a V8. So I stop searching at that point.

 

[Joe473]

All the adapters I know of only fit the V8 bellhousing (V8 transmission only). I know for a fact that Ford never sold the Transit with a V8. So I stop searching at that point.

1 company has the adapter for the ecoboost and it's a thinner adapter than the coyote adapter. The ecoboost adapter is cheaper. The ecoboost trans also has a heavier duty rear output bearing and they are more plentiful when you add in the transit van option

https://performanceadapters.com/pro...6&_sid=8920ead61&_ss=r&variant=44127552864428

 

[JB Fab]

I know Quigley Conversions has done several hundred of the transit 6R80s to NV271

 

[Joe473]

From looking at it it appears there is a small extension on mainshaft to cut off after removing drive flange. I was hoping someone on here had some experience. Seeing some good wrecked transit van takeout in my area.