• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Transmission ID

Pat B

Full Member
Joined
Aug 21, 2012
Messages
154
Okay. Giving up after searching. How do I identify a RAT or RAN trans?

Thanks,
Pat
 

Fireball05

Bronco Guru
Joined
Oct 7, 2012
Messages
1,822
You can find the tag on the right side of the transmission near the front where it bolts to the bellhousing. You should see the letters (rat, ran or hef)
 

Mill KNOB

Bronco Guru
Joined
Jun 25, 2007
Messages
1,684
Loc.
Rock Hill, SC
Okay. Giving up after searching. How do I identify a RAT or RAN trans?

Thanks,
Pat

It will be on the driver side of the transmission about middle ways. There are two pot rives that hold the tag on.

Plus it depends what side motor is in the bronco too. Because v8 and 6 cycle came withdiffer eat ones.
 
OP
OP
P

Pat B

Full Member
Joined
Aug 21, 2012
Messages
154
Awesome! Thanks guy's, I'll crawl under this afternoon
 
OP
OP
P

Pat B

Full Member
Joined
Aug 21, 2012
Messages
154
Okay. It looks like mine's a RAT....Are there differences between that and a RAN?
 

Mill KNOB

Bronco Guru
Joined
Jun 25, 2007
Messages
1,684
Loc.
Rock Hill, SC
The HEF transmission was used in the 6 cylinder engines.
The RAT and RAN transmission were used with the 289 & 302 V8 engines.
Also the RAT and RAN had different lengths of adapter housings.

Adapter House size

RAT: 8 7/8"

RAN: 9 7/8"

HEF: 6.5"
 

bulletpruf

Contributor
Sr. Member
Joined
Mar 31, 2019
Messages
522
Loc.
San Antonio, TX
Ok, so I have what appears to be a 3 speed manual behind a 170 6 cylinder in a '66 frame. However, it appears that the frame had V-8 mounts at some point, so I'm wondering if it's a 6 cylinder or V8 trans. There's a tag riveted to the passenger side of the trans right where it bolts to the bellhousing, but I can only make out numbers, no letters.

How would I identify it without HEH, RAT, or RAN stamp?

Thanks

Scott
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
And the VIN number will actually tell you which engine it was originally delivered with.
They don't tell you much more than that, but it will give you a few of the basics.

Paul
 
Top