• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Turn signal gremlins

leander77

New Member
Joined
Dec 22, 2010
Messages
20
Loc.
Leander, Tx
Here's a mystery to cipher.....
Without headlights off-
front and rear signals work correctly and indicators in the cluster work correctly.
With headlights on-
right indicator light in cluster is on and blinks on right signal - front and rear signals work correctly. (front signal is off and blinks on with signal)
left indicator light in cluster is off and does not blink on left signal.
front signal is constant on and does not blink on signal.
rear signal blinks correctly.

go figure......
 
OP
OP
leander77

leander77

New Member
Joined
Dec 22, 2010
Messages
20
Loc.
Leander, Tx
I replaced the turn signal switch earlier in the year. Maybe that's when the problem showed up. The new terminal wires did not match exactly in color, but I thought I connected to the same pins. Could have goofed though.
Is there a color chart or diagram available that shows what goes to what?
 

oleguy74

Contributor
Bronco Guru
Joined
Mar 26, 2008
Messages
2,034
Loc.
calif city ca
turn signals

hope this helps.also make sure your grounds are good at lites.
 

Attachments

  • 001.jpg
    001.jpg
    125.8 KB · Views: 84
Last edited:

barronj

Bronco Guru
Joined
Jun 6, 2009
Messages
1,859
I replaced the turn signal switch earlier in the year. Maybe that's when the problem showed up. The new terminal wires did not match exactly in color, but I thought I connected to the same pins. Could have goofed though.
Is there a color chart or diagram available that shows what goes to what?

Also ensure that you have continuity across the new connections. That was what fixed my recent turn signal issues.
 

lasadoor

Sr. Member
Joined
May 22, 2008
Messages
421
Loc.
San Diego
double check your grounds and connections. as stated before you may need to switch the wires at the bucket, one wire is for parking lights and the other is the blinker.

viperwolf ware you at?
 
Top