Vacuum boost brakes

[naneumranch]

Going to upgrade to vacuum boost brakes looking at getting the Moab kit from Wildhorse. Question is I have ZF5 transmission with hydraulic reservoir next to master cylinder.

Sent from my iPhone using Tapatalk

 

[naneumranch]

Sent from my iPhone using Tapatalk

 

[naneumranch]

Will I have to modify anything or will it bolt up? Or just won’t work ?


Sent from my iPhone using Tapatalk

 

[Jebus]

You will have to cut the holes in the booster bracket. It should clear. I think you will have to move that prop valve a bit.

I have a wilwood clutch master cyl, but it is close to where yours is.

*On second thought I think it cleared the bracket, without drilling, and it looks closer to the center of vehicle than yours.