• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Vent windo help

Bucky66

Contributor
Sr. Member
Joined
Jun 20, 2010
Messages
559
So here I painting up the trim paint on my vent windows before I assemble my doors back together. I noticed that the vent glass is loose and so it is easy to pull out of the channel. There is like a tape that held it in I can see. I removed all the old securing material from the channel to have a clean surface. What can I use to hold the glass back into the channel to keep it secure? Someone told me to use silicone. Does that sound right?

Any help would be great.
 

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I don't have any experiece with this personally, but I would contact your local auto glass guy. I know it's Sunday so this probably doesn't help much for you right away.
 
OP
OP
Bucky66

Bucky66

Contributor
Sr. Member
Joined
Jun 20, 2010
Messages
559
Thanks for the info. that is what I was afraid of but I will just have something to do for tomorrow.
 

ford man

Contributor
Bronco Guru
Joined
Aug 31, 2008
Messages
2,367
Loc.
Leesburg Ga
I bought rolls of gasket material from npd and dennic carpenter its the same as what holds the window in the window track then used silicon spray to get it to slide in it was a job and if your doing 2 windows get 4 rolls it tears real easy.
 

BR549

Sr. Member
Joined
Jan 18, 2012
Messages
444
Loc.
huntsville
Go to any glass shop and buy a roll of byutl . Not spelled right, but black sticky bead of caulk. Use a head gun to remove the old and clean up with mineral spirits. Expect to pay 10-15 dollars
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
Sorry bud...reread your post and now see what you're asking. Yes, your best bet it to have a glass shop reset it. I had my door glass done and they used a black adhesive that came out a caulk gun. Guy said the glass will break before it comes loose again.

Sent from my DROID RAZR using Tapatalk 2
 
Top