• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Warn full floating rear end/disc brake conversion leak

Bumper

New Member
Joined
Jul 16, 2010
Messages
42
Loc.
Learned, MS
Got a 74 bronco that has a warn full floater conversion on the ford 9 in rear. Cannot figure out why in the world i still have a fluid leak that seems to be coming from behind the "switch" used to lock or unlock the hub. Any info would be welcomed, Im about to set this truck on fire and watch it burn.
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
The chronic leaking with that set up has always been an issue, that's why Warn stopped making those for the 9" rear. Some guys haven't had any problems, other have switched to drive flanges and ditched the locking hubs. Good luck.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Don't need to burn the whole truck, just the rear end.
The Warn conversions leaked. They have been doing that since they were first made. Between that and the failing hubs that were not strong enough to be used in the rear axle of a Bronco is why they are no longer offered, nor are the parts to fix them.
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
Still running a 35 spline kit on the rear with flanges. I've sealed it up many times. Early on we stopped selling the kits when the leaking issue kept coming up. We also noticed that the condition of the rear end housing played into the problem. Weak housings flex (not that you can see it) to much. this causes the axles to rub inside the spindle and wears grooves into the axle. I still think these were a good idea just not executed well.
 

dnewman9

Bronco Guru
Joined
Aug 12, 2003
Messages
1,305
I would love to have this setup so I could unlock and flat tow my truck behind my RV.
D
 

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664
I've had a Warn FFr on my Bronco for about 13-14 years now. I switched to the drive slugs after breaking 3 locking hubs (no more breakage). I run mine without the inner oil seal so that my bearings are always bathed in gear oil, like all 3/4 and 1 ton rear ends, and by chance the axle should rub the spindle (it dosen't), there would be a cushion of gear oil to keep it from wearing. However, I have had absolutely zero issues with oil leaks. There were problems with the very early spindles (like mine) not having the keyways machined deep enough so that proper bearing preload couldn't be set and causing premature bearing wear and possible leaks......here:http://www.hoodlift.com/reviews/Full_Floater_Tip1.htm I love my FFr, it's been pretty bulletproof:)---------Hans
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I had the leaky hub problem so I ended up putting the outer seals in and using grease on the bearings. Now running flanges after breaking a few of the warn hubs.
 

WILDHORSES

Sponsor/Vendor
Bronco Guru
Joined
Nov 7, 2003
Messages
2,253
Loc.
USA
I think it should be obvious that these kits were problematic by the fact that they were discontinued. We sold and installed quite a few. That was 7-8 years ago. My experience with running the bearings in gear oil or grease is as follows.

Run with no seal and let the bearings be oiled with gear oil. I prefer this method because potential problems can be avoided. All you need to do is stop the oil from leaking out. We used slugs/drive flanges and a lot of "The Right Stuff" from Permatex. I can go a couple years between resealing it at this point.

The potential problem with running the seal and just using grease is a lot of times there is enough movement in the axle or flex from the housing or combination of both that the seal can rub the axle. In more than one case I've seen the axle take out the seal by rubbing on it. In the worst case the seal welded itself to the inside of the spindle and cut a groove in the axle. I spent half of a Moab trip repairing that one.

I still like the idea and still use the 35 spline kit in the Mare. Peace out!
 

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664
I think it should be obvious that these kits were problematic by the fact that they were discontinued. We sold and installed quite a few. That was 7-8 years ago. My experience with running the bearings in gear oil or grease is as follows.

Run with no seal and let the bearings be oiled with gear oil. I prefer this method because potential problems can be avoided. All you need to do is stop the oil from leaking out. We used slugs/drive flanges and a lot of "The Right Stuff" from Permatex. I can go a couple years between resealing it at this point.

The potential problem with running the seal and just using grease is a lot of times there is enough movement in the axle or flex from the housing or combination of both that the seal can rub the axle. In more than one case I've seen the axle take out the seal by rubbing on it. In the worst case the seal welded itself to the inside of the spindle and cut a groove in the axle. I spent half of a Moab trip repairing that one.

I still like the idea and still use the 35 spline kit in the Mare. Peace out!
Are replacement parts still avaiable? I wouldn't mind having a spare spindle to carry in my rig. What about axle shafts, Warn (back then) gave a lifetime warranty on them but, what happens if I should break one (hasn't happened yet....knock on wood:eek:) who'll honor it?:? Also, does the 35 spline set up have bigger diameter shafts, meaning the spindle has a bigger bore? Is the outer spline 35 as well? That would be really bullet proof:) -------Hans
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Are replacement parts still avaiable? I wouldn't mind having a spare spindle to carry in my rig. What about axle shafts, Warn (back then) gave a lifetime warranty on them but, what happens if I should break one (hasn't happened yet....knock on wood:eek:) who'll honor it?:? Also, does the 35 spline set up have bigger diameter shafts, meaning the spindle has a bigger bore? Is the outer spline 35 as well? That would be really bullet proof:) -------Hans

As far as I know, replacement parts are no longer available - you're stuck trying to find parts on forums such as this. I got rid of mine a few years back when I couldn't keep the leaks fixed - even with the drive slugs instead of hubs.

Currie is working on a 35 spline floater kit right now that looks like it might be a good option for EBs. It's advertised for the Jeep JK but since it can be used on a 9" rear end (with the proper ends), it could be easily adapted to the EB. Uses JK brakes (virtually identical to the Explorer stuff) so you can have a good parking brake too. They had a prototype and a flier at last fall's Off Road Expo but nothing on their website yet. I called a few months ago and they expect something by this summer. Just another option in case folks want something similar (but I think it'll be better) to the Warn kit.

Todd Z.
 

Oatmeal

Sr. Member
Joined
May 17, 2009
Messages
664

gddyap

Bronco Guru
Joined
Mar 8, 2005
Messages
1,334
Loc.
Mtn View, CA
From a similar discussion on the norcalbroncos.com forum:

It turns out the groove for the outer snap ring that keeps the slug on the axle was machined too wide. When you tightened down the lock out bolts it felt tight but there is just enough play to create leakage. The solution is to run two snap rings which brings the tolerances back in spec. I fought this problem for years before finding the fix. No more hub condoms to catch the oil
 

gddyap

Bronco Guru
Joined
Mar 8, 2005
Messages
1,334
Loc.
Mtn View, CA
Uses JK brakes (virtually identical to the Explorer stuff) so you can have a good parking brake too.

Todd Z.

I think it's a stretch to call the Explorer parking brake "good", depending on tire size. My experience with it hasn't been that great with 35-37" tires. That drum is just too little for anything bigger than 31s.
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
As far as I know, replacement parts are no longer available - you're stuck trying to find parts on forums such as this. I got rid of mine a few years back when I couldn't keep the leaks fixed - even with the drive slugs instead of hubs.

Currie is working on a 35 spline floater kit right now that looks like it might be a good option for EBs. It's advertised for the Jeep JK but since it can be used on a 9" rear end (with the proper ends), it could be easily adapted to the EB. Uses JK brakes (virtually identical to the Explorer stuff) so you can have a good parking brake too. They had a prototype and a flier at last fall's Off Road Expo but nothing on their website yet. I called a few months ago and they expect something by this summer. Just another option in case folks want something similar (but I think it'll be better) to the Warn kit.

Todd Z.

todd, im sure it is a lot bigger over all unit, but adam householder was the first to get curries new trophy truck floater. its very nice, has more ground clearance than most and still excepts the 10 in ring gear 3rd member. but being currie, im sure they are proud of it :)
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
todd, im sure it is a lot bigger over all unit, but adam householder was the first to get curries new trophy truck floater. its very nice, has more ground clearance than most and still excepts the 10 in ring gear 3rd member. but being currie, im sure they are proud of it :)

Yes, the TT rearend is a different piece than the setup I've been eyeing. The one I'm interested in is more in the realm of "affordable" compared to a lot of the race-oriented floaters out there (Cone, Tubeworks, etc.) but still more $$ than the Warn. We'll see...

Todd Z.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I think it's a stretch to call the Explorer parking brake "good", depending on tire size. My experience with it hasn't been that great with 35-37" tires. That drum is just too little for anything bigger than 31s.

It's "good" compared to the Cadillac calipers and the older Lincoln calipers. I've used it with 35" tires on my truck for about 5 years now with no problems.

Todd Z.
 
Top