• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Welding Prices

7bronco6

Full Member
Joined
Jun 4, 2008
Messages
229
Loc.
PA
I have a front double shock hoop that the previous owner must of welded on and the last place I took my Bronco to, the guy mentioned it should be ground down and rewelded.

What is a reasonable price I should be looking for in PA? Just to reweld a dual shock hoop. Why is it so hard to find somebody to do welding?? Half the places I call don't want to work on car's because of liabilitity reasons. The other half want to charge me what seems to be the price I could buy a a welder for. What am I missing?? At All4Fun they say add 300 dollars to have the roll cage welded, which is what I'm trying to base some of these welds that I need done. (shock hoop, steering box plate) I've never welded before so I don't know what all has to be done. But a lot of these places are sounding like the rod is dipped in gold first. I don't want to get ripped off, but at the same time I want it to be done right and safe.

Thanks for any suggestions.
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
there has to be someone in your area that has a welder and do for a six pack
 
OP
OP
7bronco6

7bronco6

Full Member
Joined
Jun 4, 2008
Messages
229
Loc.
PA
:pIf you were in Chicago, I would do it for some good beer.

If I can't find anybody, I might have to drive out there and take you up on that offer. hah

there has to be someone in your area that has a welder and do for a six pack

Yeah I have some friends that are in the fence business that have a welder, but was going to use them as a last resort.
 

scbronco

Full Member
Joined
Feb 12, 2010
Messages
305
Loc.
Sumter, SC
my suggestion is to do a members search by your state. like the other two posts said there should be a board member that'll help you out for a friend rate. if you were in sc, id damn near do it for free. i dont drink these days, and running my welder is about as theraputic for me as a good massage. LOL however to answer your question directly. i would think a decent welding/fab shop would run the two beads in question for no more than 100-125 prep work included. if you remove the parts and take it to them so its easier to handle, as opposed to taking the whole truck there and leaving it to them, it may save you some cash...

oh, i meant to also say that what drives the cost up is the prep work. they have to sometimes cut out and regrind the area to prepare it for a good solid weld, and that usualy takes 5 times longer to do, than to actually run the bead, and clean it off for paint...
 
Last edited:

chris

No more Rock Crawler
Joined
Nov 27, 2002
Messages
1,894
Where at in Pa? I'm a little outside Philly in Hatboro.
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
I'm located near York, PA and have a fully equipped shop.
 

scbronco

Full Member
Joined
Feb 12, 2010
Messages
305
Loc.
Sumter, SC
Yeah I have some friends that are in the fence business that have a welder, but was going to use them as a last resort.

friends arnt a last resort! thats why they are called friends! paying a stranger is a last resort! just make sure you return the favor one way or another, so those friends are still there in the future ;)
 
OP
OP
7bronco6

7bronco6

Full Member
Joined
Jun 4, 2008
Messages
229
Loc.
PA
friends arnt a last resort! thats why they are called friends! paying a stranger is a last resort! just make sure you return the favor one way or another, so those friends are still there in the future ;)

Yeah your exactly right, I guess I'm just doubting my friends capabilities. A little bit. lol
 
OP
OP
7bronco6

7bronco6

Full Member
Joined
Jun 4, 2008
Messages
229
Loc.
PA
my suggestion is to do a members search by your state. like the other two posts said there should be a board member that'll help you out for a friend rate. if you were in sc, id damn near do it for free. i dont drink these days, and running my welder is about as theraputic for me as a good massage. LOL however to answer your question directly. i would think a decent welding/fab shop would run the two beads in question for no more than 100-125 prep work included. if you remove the parts and take it to them so its easier to handle, as opposed to taking the whole truck there and leaving it to them, it may save you some cash...

oh, i meant to also say that what drives the cost up is the prep work. they have to sometimes cut out and regrind the area to prepare it for a good solid weld, and that usualy takes 5 times longer to do, than to actually run the bead, and clean it off for paint...

Sorry I wasn't really clear in my first post, I would need to have the driver/passenger dual shock hoops rewelded to the frame. So a total of 4 beads?? So would you think $200-250 if I had a shop do it??
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
If it clean and ready to weld that would be way too much IMO.

If it is greasy and covered in layers of paint and needs lots of prep and stuff removed to get to it, etc. Then maybe, but that would still seem high.
 

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
Have you thought about making friends with a good exhaust shop? Maybe kill two birds with one stone... They'd be able to do it. When I got my exhaust done the guys loved my truck and we agreed on a price and they even threw in a free inspection and included the tax in the total. I've gone back for inspections and they always pass me.
 

scbronco

Full Member
Joined
Feb 12, 2010
Messages
305
Loc.
Sumter, SC
possibly... if they had to remove any parts to gain access. but still its just shock hoop. your not running coilovers, so its not supporting the weight of the vehicle. i would stick with 100-125 if the area is accessible.
 
Top