I have a centech harness in the bronco. Do those columns come prewired for the centech?
Not really Centech specific, but depends on which column you go with.
The Direct Fit columns are wired for Bronco wiring, using a Bronco specific turn signal switch with later connector. So no matter which harness you have, you'd have to do some minimal wiring changes to make a Direct Fit work.
With the standard tilt column kits:
https://www.wildhorses4x4.com/category/Bronco_Tilt_Columns most use GM color codes, which is what your Centech harness has. They also come with the same type of flat GM style connector, so if you have not altered that part already they should be almost a direct plug-n-play affair.
Luckily for those instances where the pin location does not match, you have all of your wires in the Centech marked as to their function. You won't know until you get them lined up, but I could see there being a difference in perhaps how the horn is wired up.
Easy to figure out though.
Also any reason not to go with a column shift?
Not that I can think of. Really the only negative is the higher price. But then that's more than offset by having to buy a floor shifter for an automatic transmission.
The advantages are easy shifting, and a TON more room between the seats.
That last all by itself is enough reason for me with Broncos. I love floor shifts, but I really missed my floor space when I converted to a floor shift with my stock 3-speed years ago.
I actually don't know whether the columns have lighted shift indicators, but chances are they do not because of all the choices of different types of indicator. Still, I wish that was a thing they'd take care of. I could be wrong on that though, so we may have to double check.
Paul