• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What is this part?

brnco_luvr

New Member
Joined
May 15, 2020
Messages
47
Loc.
San Diego
Was looking underneath to check for leaking gas (which turned out to be overfilling of the aux tank, I drained some gas and it has resolved). Found a metal tubing that had an open end at the driver side next to the aux tank; followed it across to the passenger side and toward the front, and led to this part. What is this part, and what is the function? Is the line coming out of/going into it supposed to be connected to something on the other end?
 

Attachments

  • 20200905_160746_2.jpg
    20200905_160746_2.jpg
    138.3 KB · Views: 198

bseager

Jr. Member
Joined
Feb 18, 2015
Messages
52
Looks like a charcoal canister for evap system

Sent from my SM-G892A using Tapatalk
 

cs_88

Contributor
Bronco Guru
Joined
Jul 28, 2005
Messages
1,324
Yes, that is a charcoal canister.

The other end is supposed to be connected to the vapor separator tank that is located in a compartment behind the driver's seat.
 

Attachments

  • DSCN0728.JPG
    DSCN0728.JPG
    145.7 KB · Views: 144

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Because someone didn't understand it, or didn't like it because it was "smog crap" or just left it disconnected after some kind of servicing or engine work.
Or the hoses that were originally supposed to go up into the engine compartment deteriorated to the point that they just got tossed.
Any number of reasons. Including maybe some gas got into the canister past all the other safeguards and they were trying to let it evaporate more quickly. Unusual, but not unheard of.

The canister on the frame would have had two large paper/fabric-ish hoses from the large fittings up into the engine compartment. One went to the side of the air cleaner housing and the other was just up high and open to the outside air.

The hose is probably still available at the local parts stores I would think. Some call it "smog hose" while others have different names for it. The factory stuff was mostly a light tannish/grayish, but most I've seen at the stores is a black-ish color.

Paul
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
And here are another couple of diagram from the factory manual that may help in understanding how it works and where it connects.
 

Attachments

  • charcoal_73_emission_2.jpg
    charcoal_73_emission_2.jpg
    98.8 KB · Views: 66
  • evap_diagram.jpg
    evap_diagram.jpg
    79.3 KB · Views: 92

73bronco302

Jr. Member
Joined
Mar 6, 2018
Messages
60
Cal. has grandfathered in as smog-exempt for 1975 years and earlier (the rollback was 30 years for classic cars and stopped in 2005).

For smog checks, they do check the gas caps. Presumably to see if the seal on the cap has "leaking" fuel vapor. But they don't test Bronco gas tanks and/or charcoal cannisters for leaking fuel vapor.

My 1973 non-Cal. (just tore down to the frame) has the white plastic box behind the drivers seat, and the tubing going across the frame to the passanger with a bolt in the end of the hose attached to the metal tubing. Any charcoal cannister is long gone. I saved the tubing just so I know how to replace it.

I am going to reinstall mine to get the "stock look."

I would be more concerned about getting a cannister that is "plugged up". If the charcoal cannister can get plugged up, presumably the vapor would simpy fill up the line going to the charchoal cannister, and then go "backwards" out the "vent" on the plastic box and into the passenger compartment? Which I guess would defeat the entire purpose of eliminating the vapor by runnng it into the air cleaner?


Do they come apart or has anybody cut open a charcoal cannister?
From the image it looks like a screen or filter inside the charcoal cannister? Is there a way to take out the 50 year old charcoal and replace if the can doesn't open up?

Or perhaps charcoal still acts as a filter for thousands of years?
 

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
There is no vent on the liquid-vapor separator bottle. The charcoal can is pretty porous and will not on normal circumstances plug up. But assuming it did, the vapor would likely purge from the gas cap.
 

73bronco302

Jr. Member
Joined
Mar 6, 2018
Messages
60
great thanks

If I find a charcoal cannister, is it heat it with a torch or put it in the microwave or bust?

Or can it even be empty and still work by going to the air cleaner?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Not understanding the question. Are you talking about recharging it by heating so any liquid goes out the top as vapor? That was an old tried-and true way of doing it. Well, not exactly "tried and true" because I never heard of anyone actually doing it! Just that it was written in books and magazines as a way to save a charcoal canister after liquid got past the safeguards and into the charcoal.

But if you find one, chances are probably pretty decent that it's still good and can simply be plumbed in as original and works from there. As long as you have it connected to the air cleaner housing, even if the charcoal medium is compromised in some way, it should still allow venting to the engine.

One would think anyway!
For some reason I did not like the big deep one on the Broncos once I found out that cars used smaller ones. I got one off of a Pinto in a junkyard that was about half-height of the original and that's what I've been using for 35 years or so.

The "best" way to do it these days is to simply buy a new one for a Mustang or newer truck ('70's through '90's newer that is) and mount it up high on the firewall and eliminate the condensing tank in the cabin completely. Just vent the tanks directly to the canister and put in a rollover safety valve down on the frame.
This won't look stock on a '73, but it's how Ford did it on '76 and '77 Broncos.

Paul
 
Top