What year Mustang front seats are a clean bolt-in?

[reamer]

Is it only '66 to '68 or are other years a straight bolt-in mod? looking for a set with head rests.
I took off the back panel from my '73 Bronco seats, but they do not have the required frame/hardware in them that some say "is in there." so looking to acquire swap-in seats, just need to know what year range is compatible..
Thanks

 

[jckkys]

69's are good too so are the '69 head rests. I used the '69 headrests on my '77 Bronco seats. They just slip in and the pass. seat still folds up to the dash.

 

[Yooper74]

I dont think this is exactly what you are asking but these 2007 seats were a pretty clean bolt in.

 

[reamer]

Looks good, what did they come from?

 

[Yooper74]

2007 Mustang GT. A friend does race cars from salvage mustangs so he had a few sets for sale.

Pretty simple install. Cut the 'feet' off and made a couple brackets. Mostly used the factory bolt holes.

 

[jmhend]

2007 Mustang GT. A friend does race cars from salvage mustangs so he had a few sets for sale.

Pretty simple install. Cut the 'feet' off and made a couple brackets. Mostly used the factory bolt holes.

Two questions....

#1- can you take a few close up pictures of the mounting and how you cut the brackets?

#2- what is the measurement from the floor / mounting surface to the top of the seats.

Jason

Sent from my SM-N960U using Tapatalk

 

[Yooper74]

Can do. I’ll get that tonight.

You want measurement to top of seat bottom or top of seat back straight up and down?

 

[jmhend]

Can do. I’ll get that tonight.

You want measurement to top of seat bottom or top of seat back straight up and down?

Haha now that you ask....both? To much to ask?

Sent from my SM-N960U using Tapatalk

 

[Yooper74]

Not at all. I figured i'd throw a new thread up to not side track this one any further

Check out the new thread "mustang gt seats installed"

 

[omureebe]

Is it only '66 to '68 or are other years a straight bolt-in mod? looking for a set with head rests.
I took off the back panel from my '73 Bronco seats, but they do not have the required frame/hardware in them that some say "is in there." so looking to acquire swap-in seats, just need to know what year range is compatible..
Thanks

So you know you can buy from Mustang sources (like CJ Pony Parts) the attachment for headrests? I may have a set of upper seats to retro your seats. I did this in my 67 using 69 Cougar parts (I have two 69 Cougars so.... yeah I have parts). If you want I'll see what I have, but going to the later Mustang seats is a whole different option.

Omar in CT