• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Who makes this bumper?

23firefly

Full Member
Joined
May 31, 2004
Messages
340
Can't seem to find info on this type of front bumper. Anyone know about them?
I know it's a small pic but it's all I can find.


BrianClawe.jpg
 

Bronco Brian

Bronco Guru
Joined
Feb 10, 2006
Messages
1,140
Looks like a Hanson I went to the web site but it looks like they don't make Bronco bumper any more :-( I could be wrong lets hope

Brian
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
does look like a hanson, and no they don't make them for broncos any more. loosing a lot of money they are...
 

green77bronco

Sr. Member
Joined
Dec 10, 2004
Messages
466
Loc.
SAn Antonio,TX
Thats a good looking Bumper. I thought about buying one a few years ago on a mass buy, but didn't have the money. I guess I missed the boat.
 

Z Bronco

Bronco Guru
Joined
Mar 17, 2007
Messages
1,143
Hanson Off Road stopped making bronco bumpers. I bought one of the last two front bumpers they had a couple of months ago, so I would give them a call to see if they still have the last bumper left. By the way, these bumpers were the standard front bumpers.
 
OP
OP
2

23firefly

Full Member
Joined
May 31, 2004
Messages
340
Thanks for the information guys.
Bummer about Hanson not building bronco bumpers anymore.
Looks like I have to make my mind up between; Proto-fab, Baile, or Duff plate bumpers. I really liked how Hanson had a lower center section.


OneBad

Do you have any body lift? That bumper seems to fit perfect.
 

green77bronco

Sr. Member
Joined
Dec 10, 2004
Messages
466
Loc.
SAn Antonio,TX
Do you have any body lift? That bumper seems to fit perfect.


His sig has an 2" body lift. That does look good on his Bronco, I was thinking about getting the Protofab front just to match my rear. But now I might change my mind. I have an 2" body lift also and like the look of the Duffs location, looks perfect. Also the Protofab bumper looks a little too big.
 

onebadd73

Sr. Member
Joined
Sep 22, 2003
Messages
376
Loc.
Moreno Valley, Ca.
Yes I do have a 2" body lift. I liked the duff bumper over the protofab because its has less overhang on sides and I liked the fact that it has clevis mounts.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
We might still be able to get the "Hanson" the old-fashioned way.
Wayne Hanson still makes custom bumpers (mostly for full-size trucks) in his old shop and I've been talking to him recently about getting some Bronco bumpers made. He's already got a couple of local guys waiting for him to make the time to put some together anyway, so it's not out of the question.
He may make some in the old, thicker 1/4" plate since he's got more of that laying around.
I'm just waiting for some details to be worked out and a price, so we can know what to plan for.

In the meantime, if you want some other pictures 23firefly, let me know and I can e-mail them to you. The pictures you found were of the full Brush-Guard model. There are other styles and options as well.

Paul
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
Old School Hanson Bumper...
 

Attachments

  • Bumper frt view.JPG
    Bumper frt view.JPG
    87 KB · Views: 370
  • Bumper angle view.JPG
    Bumper angle view.JPG
    82.3 KB · Views: 453
OP
OP
2

23firefly

Full Member
Joined
May 31, 2004
Messages
340
Dirt Donk
I would love see is if Wayne Hanson would be up for making a short production run for thoughs of us who missed the boat.
I know you could put me down for one. I have only seen pic's of the older full brush guard bumper, is there other versions?


Do you think it would help to make a new post and see how many people are interested in buying a Hanson bumper?
Might have enough numbers to make it worth Waynes time.

I smell a Group buy
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Pictures sent. Basically there are 5 styles. Basic, Winch-Guard, Pre-Runner, Grille-Guard, and Full Brush-Guard (grille-guard with outer headlight guards).

I'm not sure what his timeframe is just yet. I'll keep talking to him to find out just what he'd need to get it going. I know he's running on a tight budget (one-man shop and all that) but will keep after him to determine design and material, time-frame, costs and how much money down he needs. And also to see if volume could help with the price (see below).


Do you think it would help to make a new post and see how many people are interested in buying a Hanson bumper?
Might have enough numbers to make it worth Waynes time.

I smell a Group buy

At this point, this is not a mass-buy or anything like that. So no need for a new post just yet. I'll see if more demand will help, or just be a drain on his limited resources at the moment. But I like the idea too, and you never know, there may be a bunch of us here that missed chances before, for one reason or another, and are in a better place to get one now.
So hey, if he's open to the idea, like he used to be...
Can't hurt to ask!

Paul
 

goneballistic

Sr. Member
Joined
Oct 3, 2007
Messages
806
Loc.
Washington, MO
I like the look of the Bailey Bilt bumpers. Look at some of the pics from OCBR on Bronco chat. You will alot of them. Look for the pic of the read and white half cab.
 

green77bronco

Sr. Member
Joined
Dec 10, 2004
Messages
466
Loc.
SAn Antonio,TX
Dirtdonk. Can you send me the different pics too. I know which Hanson bumper I like but don't have a pic. I think it's the winch guard. If the price is right, I might be interested.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Sure thing. They're not all that great of quality, but they get the basic point across.
I can't attach images to the e-mail through the site, so shoot me your e-mail address to pabra1@aol.com and I'll send them directly.

Paul
 
Top