• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

wild ride

kevin69bronco

New Member
Joined
Jul 3, 2014
Messages
25
Hey all ive got a 69 bronco... just got it running semi decent and took
it round the block..it has 2.5 lift on 33s...steering isnt bad but its friggin soft or maybe im just used to my silverado....can ya make it less touchy?

also where in the heck can I get a friggin timing pointer ... mine doesnt have one....without paying small fourtune?
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
You won't get it to steer like your Silverado. How do you mean touchy? What kind of steering box do you have? The tight ratio boxes can be pretty touchy but all of them that I have driven feel a bit over-assisted on the street. My Silverado gives a bit more road feel and is more responsive than my Bronco - but you're comparing vehicles from very different eras. Silverado has better camber/caster and a more modern linkage setup.
 

R.P. Coltrane

Jr. Member
Joined
Sep 11, 2014
Messages
147
Loc.
Iowa, the flat part
Make a pointer. Mark TDC using a home made spark plug piston stop. Rotate engine forward and back by hand, marking stop points for wherever your home made pointer lands. Halfway between is TDC. Add permanent mark to the balancer and use a dial back timing light for settings other than zero.

good luck with your truck
 
OP
OP
K

kevin69bronco

New Member
Joined
Jul 3, 2014
Messages
25
You won't get it to steer like your Silverado. How do you mean touchy? What kind of steering box do you have? The tight ratio boxes can be pretty touchy but all of them that I have driven feel a bit over-assisted on the street. My Silverado gives a bit more road feel and is more responsive than my Bronco - but you're comparing vehicles from very different eras. Silverado has better camber/caster and a more modern linkage setup.

Yea I get that.. And I guess I forget Ford had the one finger steering back then...is there a way to turn down power steering pump pressure? Would a steering dampner shock help?
 

jckkys

Contributor
Bronco Guru
Joined
Mar 15, 2012
Messages
5,221
All the power steering in the '50s-'70s was very light compared to later vehicles. I guess they wanted to make sure you knew you had PS. Now most people take PS for granted and want more road feel. I'm surprised the after market hasn't offered internal parts to update the early gears. If you compare the Bronco PS to a '60s C20 the predecessor of the Silverado, you won't feel much difference.
 
OP
OP
K

kevin69bronco

New Member
Joined
Jul 3, 2014
Messages
25
Make a pointer. Mark TDC using a home made spark plug piston stop. Rotate engine forward and back by hand, marking stop points for wherever your home made pointer lands. Halfway between is TDC. Add permanent mark to the balancer and use a dial back timing light for settings other than zero.

good luck with your truck

I thought about looking on you tube on how to make one... orjust buying one...need to figure out correct depth for stop from spark plug hole to top of piston.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Not sure what you consider a small fortune Kevin, but we sell a stock EB pointer like this: http://www.wildhorses4x4.com/product/Timing_Marker

Of course, whether it works with your damper and timing cover is open to question if the engine is not from the EB originally, or has been modified in any other way, or has ever had the damper changed out and the incorrect one put in it's place.
Lots of variables I know, but maybe a nice close-up shot of the front driver's side area of your engine will tell the tale.

And tell us more about your suspension setup. Such as:
1. What suspension lift is installed?
2. What shocks are used?
3. What tires are installed, what is their exact size, type, age and condition, and what is the air pressure?
4. What width wheels and what offset/backspacing? If not sure, got pics?
5. What steering modifications, if any, were made to compensate for the lift if needed? Normally a 2.5" doesn't require what a 3.5 would, but it's still taller than stock ans some rigs are just more sensitive than others to this.

Good luck.

Paul
 

R.P. Coltrane

Jr. Member
Joined
Sep 11, 2014
Messages
147
Loc.
Iowa, the flat part
A home made piston stop doesn't have to be exact about length, it just has to be long enough to stop the piston. Weld or epoxy a bolt into the middle of a busted out spark plug.

This way will also tell you if there's a slipped inertia ring on the balancer. Pretty common when the vulcanizing that holds the halves is 40 years old.

good luck with your project
 
Top