• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wild ride

MikeCon

Full Member
Joined
Apr 7, 2019
Messages
276
My 73 with power steering tends to veer to the left when I hit dips at speed.Today it almost changed lanes on me at about 50mph. Ball joints maybe? Any advice appreciated.
 

fordfan

Bronco Guru
Joined
Sep 13, 2009
Messages
3,592
It sounds like classic Bronco bump steer. This happens when the suspension compresses, it causes the steering linkage to steer one way or the other without the steering wheel moving. Make sure the drag link (linkage from the pitman arm to the tie rod) and the track bar are parallel and preferably close to level with the ground as possible. Maybe a drop pitman arm and/or a riser or drop track bar bracket. All of this is exaggerated if there's other steering issues like not enough caster, loose bushings etc.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
well I'm glad it wasn't worst.. damn sure could've been
 

Justafordguy

Bronco Guru
Joined
Sep 26, 2009
Messages
6,255
Post some pictures of your front suspension and we can tell a little better what could be happening.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
Mine did something similar when I bought it, but the steering geometry was spot on...turned out to be trashed track bar bushings allowing the axle to move laterally relative to the rig, especially when hitting a bump.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Yeah Mike, we need to know a little bit more in detail.
Was it always doing this? Or did it just start?
Did it just get worse all of a sudden, or could the bump you hit have been a little more than normal?
Is the Bronco lifted? What other modifications? Heavy stuff, lightweight?
What size are the tires AND the wheels?
How old are the tires?
How old are the trackbar bushings?
Do you have alignment readings?
Have you owned it a long time, or just got it recently?

Got pics?

Any or all of that might help.;D

Paul
 
OP
OP
MikeCon

MikeCon

Full Member
Joined
Apr 7, 2019
Messages
276
Will ride

73 is bone stock suspension,wheels,and tire size.bushings all look OK and hold grease.will post some pics soon.No shimmy while driving but does wander quite a bit and cluncks when turning at slow speed. 130,000 miles so thinking of starting with ball joints and tires.
Put a couple hundred miles on it since getting it from my cousin a couple years ago.Driven the same since I have had it.
Gonna remove hardtop and give painting a shot. Again,advice welcome.
My grandfather bought Bronco new in 72 and I want to keep it as stock looking as possible.
Maybe update suspension.
 
OP
OP
MikeCon

MikeCon

Full Member
Joined
Apr 7, 2019
Messages
276
Thanks for the response's. Will post pics soon and let everyone know final solution.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
After checking everything you can find to check.
Go back & LOOK at your frame where the steering Box mounts . I've not broke one of a Bronco BUT I Sure did on an old Blazer about a 74.
. Man you talk about dart at times .. I like to have never found that break.
Some of the Vendors on here offer backing plates to help streaking.. ''don't believe that spelled correct''. But I really believe the Bronco frame at that point is easier to fix. than the Chebys.
... I don't believe what you described the death wobble. With D/W i've always had to slow down to 20mph before it'd straighten out . To me your just swapped the line of fire.
 
OP
OP
MikeCon

MikeCon

Full Member
Joined
Apr 7, 2019
Messages
276
Not the death wobble. Experienced that with my first car which was a 66 bronco without power steering. This bronco has had an easy life as far as very little off roading. But I will check the frame mounts.
 

jperry1290

Sr. Member
Joined
Jul 1, 2010
Messages
920
What about the steering shaft and steering box? My old manual steering box was so worn out that my steering wheel moved side to side a few inches.
 

stout22

Contributor
Bronco Guru
Joined
Dec 13, 2006
Messages
3,023
Loc.
Athens, AL
I had a bad shock that would cause something like what you are describing. It was on a bone stock 75.
 
Top