• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

windshield cowl rust

ford49

New Member
Joined
Jun 22, 2014
Messages
34
Loc.
Torrance
Hello everyone,

I just bought a 71 Ford Bronco Sport from the original owner. He said at one point California was making people smog 66 and up. He had just put a build 302 in it. It would not pass smog. So he parked it for approximately 8 years in his driveway un covered. It has original floorboards with medium rust. But the point of this threat is that I just noticed the windshield cowl, undernieth the dashboard that the brake and clutch pedal bolts to is completely rusted out. Now, from what I can tell the rust starts at the driver's kick panel and goes about 10 inches towards the passengers side. So, yes...I have seen a lot of people replace the whole thing and cut the top cowl completely out to replace that brace. But is there anyone out there (with pictures) that has just replaced the area I described. From the driver's kick panel then just past the brake assembly. Basically...when I use the clutch it moves approximatly 1 inch away from that cowl area.
 
Top