• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windshield Frame Hinge?

chriskent85

Full Member
Joined
Aug 17, 2016
Messages
293
How is the hinge attached to the truck. Ive seen some that are welded but my body is fiberglass. My guess would be to use panel glue. Any ideas?
 

broncbusted

Jr. Member
Joined
Mar 23, 2004
Messages
125
Loc.
South Carolina
Windshield hinge attachment

The original windshield hinge was spot welded. I removed mine during restoration and will go back with stainless steel screws and nuts. I am going to use flat countersunk screws. I would think they will work for you.
 

Bronco4x4

Sr. Member
Joined
Dec 21, 2009
Messages
621
Curious >> Did you remove all the hinge material or just cut off the loops? Also, How (air chisel, etc.)
 

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
To remove entire hinge, drop windshield flat and find and mark each weld with a punch and small drill. Use a spot weld cutter (harbor freight $6 or so) to cut the welds. There are like 23 welds +/- on each side of the hinge. You might need an air chisel here and there to break some dingleberries loose. Grind the left over high spots flat with a flap wheel

https://www.youtube.com/watch?v=lk3s4ucJg7k

Hank
 
Top