• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windshield frame repair

dwhawk11

New Member
Joined
Jan 10, 2016
Messages
6
Has anyone ever repaired or replaced the drip channels on the outside of the windshield frame? Was wondering if they make those replacement drip rails.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Good question. Never heard of anyone doing it, or just don't remember. With all the other rusty bits that Broncos suffer from, it's kind of surprising these don't need it more often.
Or more likely other parts of the frame need help too, so people just replace the entire frame.

We sell quite a few, so that might be the reason you don't see more channels getting refurbed.

You might call Jeff's (Bronco Graveyard) to see if that's something they have. They're in an area that by necessity caters more to the rusty parts people, and have a lot of their own bits and pieces.
Worth a quick call anyway. I'm pretty sure we don't have them at Wild Horses.

Oh, and welcome to classicbroncos too! In case you haven't been already.

Good luck. Let us know what you end up doing.

Paul
 
OP
OP
D

dwhawk11

New Member
Joined
Jan 10, 2016
Messages
6
Thanks. both of those channels on mine are shot about 7 inches from bottom everything else is fine. Just hate to buy an entire windshield frame for 400 dollars because of this.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
I hear ya there. With just a section messed up though, I would think you could take some tubing and cut it down, or just form some metal to make a new section.
Probably a bit of work, but like you said, shame to replace the entire thing.

Good luck.

Paul
 
Top