Windshield washer nozzles on Buckaroo hood

[Meddle]

Looking for some opinions on where the best location for windshield washer nozzles on a Buckaroo hood would be, which has a sizable hump. I believe factory location places the nozzles ~7 inches back from the cowl. There is really no other choice but to put them on top of the hump, right?

 

[Ether]

I would go between the hump and the "vents".

 

[Speedrdr]

You can put them back pretty much anywhere you want to. Just have to aim each nozzle to where you want to have the water hit the windshield.

Randy

 

[76YETI]

That's a beautiful hood! I would leave them off.

 

[Meddle]

I would go between the hump and the "vents".

That was my initial thought but the hump is so high I don’t think I have the clearance to hit the windshield from those points on the hood.

On the hump, I can swivel each nozzle left or right to hit the sweet spot, but the only issue might be that could place them so high I end up squirting the front of my roof instead. I don’t know how I’d aim then vertically if needed but here is a mockup of where I’m thinking. It doesn’t take too much away from the hood. Decisions!

 

[JeepGuy]

That is probably it. Can you paint match them?

 

[Wild horse 75]

Can’t say on bronco nozzles specifically but some you can use a needle to adjust them vertically. If the stock bronco ones aren’t you should be able to find a universal one you can adjust vertically. That being said I’m with the leave them off crew.

 

[Meddle]

All done! They actually ended up hitting the windshield in the perfect spots and I don’t mind how they look.