• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Wiper wiring and the Painless wiring harness (again probably)

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
48,743
The wash doesn’t go anywhere near the wiper motor. It’s a completely different circuit that runs between the switch and the engine compartment where the pump is.
Forget the wash wire being connected to anything in the windshield.
 

bronco italiano

Contributor
Bronco Guru
Joined
Feb 1, 2004
Messages
2,117
How did painless get than 4 wire connector so wrong?
Below is the painless instructions.
I am gonna make a new pigtail with the proper 4 wires.
I wonder if centech didn't have the black wire (park) in their kit 20 years ago and the two wires in the pigtail were spliced together.
 

Attachments

  • painless wiper wires.png
    painless wiper wires.png
    251.1 KB · Views: 18
  • Wiper switch.png
    Wiper switch.png
    244.1 KB · Views: 18

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
48,743
Did you try testing that wire? Is it hot when the switch is off, on, or only when you push the washer button function?
 

bronco italiano

Contributor
Bronco Guru
Joined
Feb 1, 2004
Messages
2,117
I am still wiring the bronco. I took the pigtail out, rebuilt it with the 4 wires as painless/ford detail and then did the windshield frame ground and dome light hot.
 
Top