wiring schematics

[450rbronco]

does anyone offer any good pics of the wiring as i am getting ready to put back together and have some loose ends i need to figure out thanks

 

[Viperwolf1]

What year and what loose ends?

 

[forestguy]

here is a link that will have anything you need.

http://www.fordfuelinjection.com/?p=19

 

[70_Steve]

http://www.wsu.edu:8080/~i6735189/diagrams.htm

 

[Cooper]

Seabiscuit took the schematics and color coded them according to the color of the wires used in the factory. I found that to be a big plus in sorting through the bird's nest under my dash.

Hope it helps

http://seabiscuit68.tripod.com/

 

[450rbronco]

what id really like to see is just some actual pics of like the wires on front right and left that go to headlight turn signal marker and whatever else that what im confused with

 

[Pa PITT]

That one copper posted up I was looking for earlier tonight .. Took me about 1 1/2 hr to find it. That's the best one I've found .. But maybe some one can post you up one of the diagrams to do the head lamp relays to boost your head lamp power ..That's another good drawing .. So someone post that up..PS I need it also just haven't ask yet ..will need it next week...

 

[Viperwolf1]

This is the diagram for the front lights. Ignore the red box for the stock wiring. For headlight relays you need to add everything shown in the red box. You'll need 2 relays, a 20 amp fuse, some wiring (12-14 ga is good) and a few connectors.

 

[DirtDonk]

I can probably get pics of the corner areas of mine 450, but what exactly are you having trouble with? Are you running stock wires? If so, you can figure out where anything goes by the color codes in the diagrams linked to above.
If not though, you might have to punt.
Anything we can help with "verbally" before we can get pics to you? That part of the layout is fairly basic after all. Just a few wires and plugs and grounds to deal with is all.

Paul

 

[450rbronco]

im not quite ready yet i was just looking the other night and i noticed that from the pigtails for the left side to the right side seemed to be diff and i was confused ill just have to open this thread again when time comes hopefully like 2 weeks or so thanks for schematics tho lots of my wires have paint over them so its had to tell colors and looks like some of the grounding wires are screwed to body idk if that factory or what this is my first time doing a vehicle

 

[Viperwolf1]

looks like some of the grounding wires are screwed to body idk if that factory or what

It is factory.