• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

With 3 1/2" suspension lift (no body, cut rear) how big can my tires go?

digmy76

Sr. Member
Joined
Jan 17, 2003
Messages
505
How big of a tire can I run with a 3 1/2" suspension lift, cut rear (stock front fender) and NO body lift?
 

Little71

Jr. Member
Joined
Jun 19, 2003
Messages
145
With a 3 1/2 inch suspension and no body lift you probably won't want to go any bigger than 33's. With uncut front fenders you might catch the lower front portion of the fender when the wheels are cranked all the way to one side.
 

Desert Thrasher

Bronco Guru
Joined
Jul 14, 2001
Messages
2,353
I agree, with a 3.5" suspension lift you can run 33's. I wouldnt go much bigger without a body lift. You will probably rub a little when articulating with 33's but nothing too terrible.
 

bnk70bronco

Sr. Member
Joined
Dec 18, 2002
Messages
368
Loc.
Redding, CA
I only have 3 1/2 lift and run 36" on the trail. Of course I did some moderate fender trimming. 35" would probably be ideal. I rub ever so slightly when fully stuffed in the rear on the inner fenderwell.

Brandon
 
OP
OP
digmy76

digmy76

Sr. Member
Joined
Jan 17, 2003
Messages
505
Thanks! I will probably go for the 33's until I get a body lift. 8)
 
Top