• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Zf5 shifter

buck68

Sr. Member
Joined
Feb 19, 2013
Messages
641
I'm getting everything together to do the ZF swap. I was wondering if the stock ZF shifter could still be used or does it hit the dash?

Thank you

Kirk
 

Casey4wd

Sr. Member
Joined
Apr 30, 2015
Messages
561
Loc.
Austin, Texas
It hit the dash in my Bronco. I bought the kit from JB Fab and bent the stainless rod some. I am waiting till it is all back together again to bend it into just the right location.
 
OP
OP
B

buck68

Sr. Member
Joined
Feb 19, 2013
Messages
641
Thanks. I thought that I had read it hit the dash. Might eventually have been your post. I was thinking of going with JB FAB too if the stock ones didn't work.
 

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,620
Loc.
Ringwood, NJ
It comes close but mine didn't hit. You can put a JBFab zf shifter on it and bend it any way you'd like to fit if you think it comes too close to the dash.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
A simple fix that I have seen used by some on here is a piece of flat plate bolted to the shifter and then the handle bolted to the plate farther to the rear, it can also be angled toward the back.

Edit; found some pics:
 

Attachments

  • Mvc-0012s.jpg
    Mvc-0012s.jpg
    22.8 KB · Views: 104
  • Mvc-0013s.jpg
    Mvc-0013s.jpg
    25.3 KB · Views: 163
Last edited:
Top