sykanr0ng
Bronco Guru
- Joined
- Aug 11, 2014
- Messages
- 5,363
ive got 3.5 running a custom 2" front driveshaft to clear pan.
Thanks, and I apologize in advance for more questions but it's valuable info to me.
Do you think it would work with a 2.5"?
Is your custom shaft a skinny shaft?
Is your axle narrowed?
My quick mental math figures the pinion would move about 1.5" closer to the center on a narrowed axle versus a full width axle.
With a 2 1/2 inch lift it would be another inch closer than with his 3 1/2 inch lift.
Which means the radius of the shaft would need to be an inch smaller to clear.
The radius is half the diameter.
So the shaft diameter would need to be two inches smaller.
So a zero inch shaft.