Hey folks,
It's been a while since I've been able to post. I've put out a few other posts on specific hurdles encountered or achieved, but here's the latest on my build.
Engine is just about done....working on the little things now. HUGE shout out to the EFI Guy, Garry, for his help and time answering my questions from the boneyard and garage! Definitely a brother willing to help. Very much appreciated, Garry!
I'm thinking about flipping the intake to pull air from the driver side. Scored a nice cold air box from a 2001 Exploder that may fit perfectly on that side. Have to test fit the motor to see if my Hydroboost is going to conflict with that move.
Right now I'm ready to clean and paint the front diff and frame back to 2nd body mounts that my body shop was kind enough to overspray badly! Lots of cleaning and wire wheel action in my near future.
Question - I'm going with the Dodge Neon coil packs in place of the explorer packs. Both have 3 pin terminals to hook up to and I have the correct connectors. Can I just re-pin the Dodge connectors in the same orientation as the Exploder connectors and be good to go? EFI Guy? (many thanks for your help!)
I'll be cutting my window for the computer pretty soon and then work on the firewall harness. Have to see how difficult pulling the dash will be so I can see what I'm doing to integrate the old with the new. Big fun coming! Here's some pics. Cheers, B2