WARN 8274 mounting plate

[Silverhorse]

I have been looking everywhere for a simple mounting plate to mount my 8274 to my existing bumper and can't find anything .

 

[Silverhorse]

This is what I have in mind.


http://www.norcalbroncos.com/forum/attachment.php?attachmentid=1009&d=1134525459

http://www.norcalbroncos.com/forum/attachment.php?attachmentid=1095&d=1137389534

 

[ransil]

Look at the one in this thread;
http://classicbroncos.com/forums/showthread.php?t=119159&page=2

I trail tested it today.

 

[Silverhorse]

Look at the one in this thread;
http://classicbroncos.com/forums/showthread.php?t=119159&page=2

I trail tested it today.

I like it. Where can I get one?

 

[tcjones76]

Warn PN 11078 Universal Foot Forward Mounting Plate (no good pictures on-line)

 

[Silverhorse]

Warn PN 11078 Universal Foot Forward Mounting Plate (no good pictures on-line)

Ok , Now were getting somewhere! Thanks a million!

 

[tcjones76]

Ok , Now were getting somewhere! Thanks a million!

I used 2X4 tubes into the frame horns, covered those with a 1/4 inch plate to connect the side wings and bolted it all together. The winch plate holes lined up with the 2x4 tubes. I still need to finish with some 3/8" steel to cover it and do some welding.

 

[Silverhorse]

I used 2X4 tubes into the frame horns, covered those with a 1/4 inch plate to connect the side wings and bolted it all together. The winch plate holes lined up with the 2x4 tubes. I still need to finish with some 3/8" steel to cover it and do some welding.

How thick is the WARN plate itself?

 

[tcjones76]

How thick is the WARN plate itself?

It is 1/4" thick.