• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Full width axel questions?

RnrdTheFox

Sr. Member
Joined
Dec 4, 2005
Messages
727
Loc.
Superior, CO
I've been looking for some 76 -77 F150 axels locally for some time. I found a pair from a 75 truck for $300. It doesn't say if they are from an F150 or what. It says they are complete. It also says the dana44 is HP and includes calipers which means it has disk. But, I thought disk wasn't added until 76??

Seems like a good price if the dana is disk? I don't have a BOM number yet but I assume I would be getting the following:

- HP dana
- Disk front?
- Larger 5-297 U joints
- Big bearing rear end (direct upgrade to Linclond Mark V disk)
- 31 spline rear, 30 spline front
- Welded on coil mounts, NOT cast
- 5 X 5.5 bolt pattern

Is this correct? Anything else to look for??

Thanks.
 
Last edited:
OP
OP
RnrdTheFox

RnrdTheFox

Sr. Member
Joined
Dec 4, 2005
Messages
727
Loc.
Superior, CO
OK, got a little more info.

He couldn't read the build data number. He said the BOM number was 611949-16 as best he could read.

He took a couple of pics here: http://s173.photobucket.com/albums/w79/boamax/ford axles/?action=view&current=DSC04252.jpg

To me they look like 78+ axles - at least the Dana44 does. On Mr N's site, he says that the 78 axle has the panhard mount cast into the coill mount??? Opinions?

He's located about an hrs drive so I can't just stop by and look at them.

Thanks.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
Disc brakes were a option in 75 but that does appear to be a 78/79 axle because of the trac bar mount and the tierod setup is the T style. Also be aware that the lincoln rear disc is not a direct swap onto a BB rear end Ford had 2 different retainer patterns on f150's in the 78/79 era.
Many people use the 78/79 axles on there swaps The welded on wedges are not always needed.
also all 1/2 ton Ford pickups had high pinion front axles starting in 66.
 

uncle ray

Full Member
Joined
Dec 8, 2006
Messages
165
OK, got a little more info.

He couldn't read the build data number. He said the BOM number was 611949-16 as best he could read.

He took a couple of pics here: http://s173.photobucket.com/albums/w79/boamax/ford axles/?action=view&current=DSC04252.jpg

To me they look like 78+ axles - at least the Dana44 does. On Mr N's site, he says that the 78 axle has the panhard mount cast into the coill mount??? Opinions?

He's located about an hrs drive so I can't just stop by and look at them.

Thanks.

are you linking it or narrowing the axle? if neither, than i wouldn't worry about the cast wedges. even narrowing the cast wedge axles isn't a big deal.
 

Dusty

Bronco Guru
Joined
Jun 28, 2001
Messages
2,969
Those are indeed the 78/79 axles with the cast wedges up front. That's a good price although they do look a bit like they were pulled up from the bottom of a lake. I guess that's common for stuff that's spent 30 years anywhere but the west coast. You can run them full width fairly easily although it does limit your options on how to do it. You can't move the wedges so you can either run with the coils bowed outward or move the coil spring buckets outward a couple inches. If you run long arms with heim joints with high misalignment spacers (like ours) you won't have any problem with the arm geometry. They you just need to modify the track bar and drag link and you're good to go.

Dusty
 
OP
OP
RnrdTheFox

RnrdTheFox

Sr. Member
Joined
Dec 4, 2005
Messages
727
Loc.
Superior, CO
Thanks to all for the replys.

I think I will pass on these. I really want to move the wedges in when I do this. I'll keep looking.

Thanks.
 

uncle ray

Full Member
Joined
Dec 8, 2006
Messages
165
Thanks to all for the replys.

I think I will pass on these. I really want to move the wedges in when I do this. I'll keep looking.

Thanks.

FWIW when i went to full widths i moved the spring mounts on the frame out 1 1/2" and up a bit too to run taller springs. i also moved the axle forward a couple of inches, so moving the frame mounts was the best way to go. the tires don't rub the radius arms now, they did when i had the stock width axle.
 

mr.n

Sr. Member
Joined
Nov 6, 2004
Messages
710
Its either a 75 or a HP, HP wasn't available till 76.

By HP do you High Pinion?

If so you are completely wrong.
Ford started using High Pinion Dana 44 axles in 1966 for some of trucks.
The Early Bronco never came with a High Pinion axle.
Check my sig to learn more about this axle.
 
Top