RnrdTheFox
Sr. Member
I've been looking for some 76 -77 F150 axels locally for some time. I found a pair from a 75 truck for $300. It doesn't say if they are from an F150 or what. It says they are complete. It also says the dana44 is HP and includes calipers which means it has disk. But, I thought disk wasn't added until 76??
Seems like a good price if the dana is disk? I don't have a BOM number yet but I assume I would be getting the following:
- HP dana
- Disk front?
- Larger 5-297 U joints
- Big bearing rear end (direct upgrade to Linclond Mark V disk)
- 31 spline rear, 30 spline front
- Welded on coil mounts, NOT cast
- 5 X 5.5 bolt pattern
Is this correct? Anything else to look for??
Thanks.
Seems like a good price if the dana is disk? I don't have a BOM number yet but I assume I would be getting the following:
- HP dana
- Disk front?
- Larger 5-297 U joints
- Big bearing rear end (direct upgrade to Linclond Mark V disk)
- 31 spline rear, 30 spline front
- Welded on coil mounts, NOT cast
- 5 X 5.5 bolt pattern
Is this correct? Anything else to look for??
Thanks.
Last edited:











