• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

Tito

CB Fire Starter
Joined
Jan 29, 2006
Messages
10,781
Loc.
Bakersfield, CA
You mean the one I posted :-X ;D

Wife works so I will have all 3 kids (not that I dont always have them) but I am going to see if I can figure something out, I'd like to look at the Broncos not chase the kiddies all day!!!!
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
UPS arrived today. Let me tell you, this kit is BEEFY! The parallel bars are 1.5" thick, wth 1 1/8" threads on the adjustable ends. The panhard bar is 1 1/4" thick, with a press in end that gets welded later. I will have to do a little grinding (not a whole lot), as the closest size they make is 3", and my 9" axle is 3.25 diameter. Now...on to the pics...
 

Attachments

  • 100_5542.jpg
    100_5542.jpg
    92.4 KB · Views: 53
  • 100_5543.jpg
    100_5543.jpg
    77.8 KB · Views: 48
  • 100_5541.jpg
    100_5541.jpg
    172.4 KB · Views: 46
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
All the brackets are precision cut, and 1/4" thick. They even etched the axle size to easily ID the parts. This is a Thorbecke Brothers kit that I ordered from SuicideDoors.com (ask for Ricky). I am sure that our vendors make great Bronco kits, but this is WAY different Bronco (rod)!
 

Attachments

  • 100_5539.jpg
    100_5539.jpg
    179.2 KB · Views: 46
  • 100_5540.jpg
    100_5540.jpg
    172.3 KB · Views: 45
  • 100_5545.jpg
    100_5545.jpg
    91 KB · Views: 39

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
nice looking stuff, they are going to get some of my business as well, just different stuff.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Hey Bill, the pics you posted were great. My wife even got a thrill out of them. My daughter, who has ALWAYS wanted a Bronco...now wants a "street rod" one!
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
Just curious, where are the front tires lining up for you guys, width wise, with the front fenders? Is there room to push the stance out wider and still keep the tires inside the fenders? It would seem to me that running the deep offset mustang type wheels would create a narrow stance. I have always thought that custom rods like this look best when the stance is as wide as the fenders will accomodate. I wonder if you could get a full width 9" in the rear with those deep offset wheels and re-bolt pattern the axle flanges to the smaller polt pattern......
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I am not sure just yet where mine is going to line up at. I will be using the same width (235) as Bill's up front. If my calculations are correct I should be able to run a 275 in the rear. I will have a better idea in a week or two. What do you think Bill?
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
The mustang II kit was a 56" width from mounting plate to mounting plate I guess. With the mustang wheels the rims were set way inside of the fender.
The rear is 59" and something from an explorer. I bought 1" spacers for the front and pushed it out to 58" I was thinking I could have gone 1.5" but the stress on the wheel bearings and lugs was a concern of mine.

So even with the spacers the front is a good 1.5" narrower than the rear. Doesnt contact the fender when at full lock but I have to get the front down to ride height yet to recheck.

The rear is really close, less than an inch from tire to fender lip, they have not been rolled.

At the stock width these wheels will hit the upper a arms when turning. With the spacers they clear just fine, a 3.5 turn steering rack and a 92" wheel base this thing should be a little fun in the wet stuff.
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
The mustang II kit was a 56" width from mounting plate to mounting plate I guess. With the mustang wheels the rims were set way inside of the fender.
The rear is 59" and something from an explorer. I bought 1" spacers for the front and pushed it out to 58" I was thinking I could have gone 1.5" but the stress on the wheel bearings and lugs was a concern of mine.

So even with the spacers the front is a good 1.5" narrower than the rear. Doesnt contact the fender when at full lock but I have to get the front down to ride height yet to recheck.

The rear is really close, less than an inch from tire to fender lip, they have not been rolled.

At the stock width these wheels will hit the upper a arms when turning. With the spacers they clear just fine, a 3.5 turn steering rack and a 92" wheel base this thing should be a little fun in the wet stuff.


The reason I ask is, (I know its alot of extra work) I wondered if it would make a sweeter setup to widen the frame rails and the cross member to line up the side wall with the inner edge of the fender withough using wheel spacers. I cant see the actual frame widening being too terribly difficult.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
If I remember right, the Mountaineer/Explorer rear end is 59 5/8", and the Bronco/Versailles 9 inch is 58". If all I need is 1" spacer for the front, I can live with that. I am happy to pick up the extra room for the rear, as I would like to run a 275 back there.. I dropped off the 9" after work today, and it is supposed to be done being (lightly) blasted by Friday. I hope to have it welded in place Saturday, and rolling very soon.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
OK boys. One quick math/tech question. If I have a tire that is 10.8 inches wide (275mm), can I run them on a 8 inch rim?
 

bronko69er

EB Addict
Joined
Oct 16, 2006
Messages
4,599
Loc.
Renton, WA
yes, no problem. We run 12.50's on 8 inchers all day long.

But that is with a considerable amount of side wall.
If we are only talking 2-3 inches of sidewall, the angle of the sidewall is goinfg to be much greater than with a 6-8" sidewall.....
 
Top