2 into 1 running BC headers and Spintech.
I think it's for headers. I have manifolds.
When I talked to Chuck at the LEBC meeting in San Marcos I believe he said he was tweaking the design for his 2-into-1 for stock manifolds...
I like the BC 2 into 1 - but does it have to hang so low by the arms? I want to get mine up as high as I can so I can slide on the frame without worrying about tearing the exhaust off...
Not sure if you mean my set up or the BC kit but if you look at my pics you can see that the Suspension/Arms are compressed all the way up to the frame without coils. The arm brackets and leaf hanger are the lowest point's with 13 or so inches between them. With the coils in and the arms at ride height you end up sliding on the arm instead of the frame.
Doh! I guess I missed that.. Thanks for pointing that out - any reason why you didn't put the crossover pipe between the trans and oil pan?
Not much room with the 351W pan and its just added heat directly off the header that constantly radiates directly to the oil pan and transmission which are two things I'm constantly battling to keep cool when crawling. Also wanted to not worry about drive line interference under full compression and be able to access the converter drain plug easily for service






