• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Exhaust pics

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
Need a new exhaust. Need some pics to take along to show what I want. Let's see 'em.
 
OP
OP
bigjhoov

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
I don't know. It's got duals on it now, but they were put on with a block lift. I put leafs on it and they hit. I'd like to make what I've got work but I don't think I'll get that lucky. After reading a little I think I might like a 2 to 1, so show me that if you got it. If not, show me some options.
 

Heus33

Bronco Guru
Joined
Jun 1, 2005
Messages
7,488
Long tube headers, C4, dual 2.25" with cherry bombs and side exit. :-X

I really like the 2 into 1 setups with a longer turbo style muffler that dumps out where it can't be seen (like infront of the rear axle tube)
 

Attachments

  • Cherry_Bombs.jpg
    Cherry_Bombs.jpg
    55.8 KB · Views: 103

TJK74

Bronco Guru
Joined
Feb 21, 2003
Messages
3,154
Loc.
Newark CA
2 into 1 running BC headers and Spintech.
 

Attachments

  • Exit2.jpg
    Exit2.jpg
    53.8 KB · Views: 70
  • SpintechSSP1.jpg
    SpintechSSP1.jpg
    64.6 KB · Views: 67
  • SpintechSS2.jpg
    SpintechSS2.jpg
    73.7 KB · Views: 81
  • Flex Coupler3.jpg
    Flex Coupler3.jpg
    94.5 KB · Views: 77
  • Flex Coupler1.jpg
    Flex Coupler1.jpg
    104.3 KB · Views: 81
  • exhaust3.jpg
    exhaust3.jpg
    118.9 KB · Views: 98
  • Exhaust off header.jpg
    Exhaust off header.jpg
    107.6 KB · Views: 83

DonsBolt

Bronco Guru
Joined
May 5, 2005
Messages
5,249
Loc.
Chestnut Hill, Mass
Here is mine
2.5 inch pipes, and magnaflow muffler, and Y Pipe

I have a NV3550 so if you decide to use this Y pipe you might have to mount it horizontally
 

Attachments

  • exhausttip3.JPG
    exhausttip3.JPG
    199.8 KB · Views: 49
  • 2.5exhaust3.JPG
    2.5exhaust3.JPG
    39.5 KB · Views: 45
  • 2.5exhaust2.JPG
    2.5exhaust2.JPG
    45.6 KB · Views: 53
  • 2.5exhaust.JPG
    2.5exhaust.JPG
    38.3 KB · Views: 55
  • singleexhaust.JPG
    singleexhaust.JPG
    50.7 KB · Views: 61

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I like the BC 2 into 1 - but does it have to hang so low by the arms? I want to get mine up as high as I can so I can slide on the frame without worrying about tearing the exhaust off...
 

texaswildcat98

Contributor
Sr. Member
Joined
Mar 29, 2004
Messages
407
Loc.
Wichita, KS
When I talked to Chuck at the LEBC meeting in San Marcos I believe he said he was tweaking the design for his 2-into-1 for stock manifolds...

I've been talking to him, he is still tweaking the 2 into 1 for stock manifolds but he said he was close. though he has working on racing recently he said it was a priority when he returns, I think he is back now.

I think Bax and Madgyver are running a prototype version of it now.
 

TJK74

Bronco Guru
Joined
Feb 21, 2003
Messages
3,154
Loc.
Newark CA
I like the BC 2 into 1 - but does it have to hang so low by the arms? I want to get mine up as high as I can so I can slide on the frame without worrying about tearing the exhaust off...

Not sure if you mean my set up or the BC kit but if you look at my pics you can see that the Suspension/Arms are compressed all the way up to the frame without coils. The arm brackets and leaf hanger are the lowest point's with 13 or so inches between them. With the coils in and the arms at ride height you end up sliding on the arm instead of the frame.
 

Attachments

  • exhaust5.jpg
    exhaust5.jpg
    120 KB · Views: 178
  • exhaust8.jpg
    exhaust8.jpg
    84.9 KB · Views: 44

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Not sure if you mean my set up or the BC kit but if you look at my pics you can see that the Suspension/Arms are compressed all the way up to the frame without coils. The arm brackets and leaf hanger are the lowest point's with 13 or so inches between them. With the coils in and the arms at ride height you end up sliding on the arm instead of the frame.

Doh! I guess I missed that.. Thanks for pointing that out - any reason why you didn't put the crossover pipe between the trans and oil pan?
 

TJK74

Bronco Guru
Joined
Feb 21, 2003
Messages
3,154
Loc.
Newark CA
Doh! I guess I missed that.. Thanks for pointing that out - any reason why you didn't put the crossover pipe between the trans and oil pan?

Not much room with the 351W pan and its just added heat directly off the header that constantly radiates directly to the oil pan and transmission which are two things I'm constantly battling to keep cool when crawling. Also wanted to not worry about drive line interference under full compression and be able to access the converter drain plug easily for service
 

Attachments

  • IMG_1141.jpg
    IMG_1141.jpg
    93.1 KB · Views: 50

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Not much room with the 351W pan and its just added heat directly off the header that constantly radiates directly to the oil pan and transmission which are two things I'm constantly battling to keep cool when crawling. Also wanted to not worry about drive line interference under full compression and be able to access the converter drain plug easily for service

Well - sounds like I'll run into the same problems when I drop in my 393.... Alright - I'll just print off these pictures and give them to my exhaust man with the keys ;D
 
Top