• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

New Trail Rig

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
Picked up a '74 beater for the trails. It's perfect.

BQIMu9_BWk_KGrHgoOKkYEjlLmbku_BJ3NiHFJm_1.jpg


2995_1.jpg


c0a0_1.jpg


28b8_1.jpg


BQIMq_QB2k_KGrHgoOKjwEjlLmV5FdBJ3Nh3_0PQ_1.jpg
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
It looks perfict.;D
 
Last edited:
OP
OP
bigjhoov

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
As much as it looks like hammered doggy-doo, it's really solid. I was driving it around today and was surprised how solid it feels. Here's some specs.....

- 38" Super Swamper TSL's
- 302 V8 (block from a ‘93 Mercury Cougar)
- Dana 20 transfer case
- Dana 44 front axle
- Ford 9” rear axle with factory limited slip
- WILD HORSES 3” suspension lift + 3” body lift
- RANCHO 9000 shocks
- 4.88 gears
- EDLEBROCK aluminum manifold
- Front disc brake conversion (Chevy parts)
- Custom tube rear bumper
- Ford AOD overdrive automatic transmission (complete rebuild & installed July 04) with low 2.84:1 First Gear & low rpm torque converter
- B&M floor shifter
- Remote mount external transmission oil filter
- WILD HORSES rebuilt Dana 20 t-case
- DETROIT LOCKER in front Dana 44
- BC BRONCOS 24-gallon rear gas tank w/skid plate
- WILD HORSES twin stick shifter for Dana 20
- WILD HORSES inboard rear shock hoop
- SMITTYBILT 6-point roll cage with bikini top
- Custom rock sliders (2x6 square tubing)
- JAMES DUFF power brake conversion
- JAMES DUFF hood scoop
- AUTO-METER gauges (oil pressure, water temp, tranny temp, fuel)
- MSD Off-Road ignition box & vibration-proof Blaster coil
- HOLLEY 600cfm carb
- K&N air filter
- FLOWMASTER 40 series muffler on single 3” exhaust pipe
- Radio Shack weatherproof CB mounted in-dash
- Dual battery tray (fits 2 OPTIMAs; not included)
- Rebuilt power steering box
- Custom tube front bumper
- New driveshafts front & rear
- New extended brake lines (stainless steel)
- Removable in-bed storage box
- Hi-Lift jack mount on passenger rear fender
- Rear tailgate net (not pictured)
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Wish I had that box I sold you back. This one has the F150 box on it, steering hangs LOW.

I just put that box on Dads build. It works good, even the pump and lines were good. I was thrilled, love it when a plan comes together. You don't want this box. You want a 4 turn for a trail rig.
Thanks
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
BAD ASS - I may have to steel that front bumper idea... I'm sure mine will only look closer and closer to that the more I wheel it :p
 

JeffG

Contributor
Sr. Member
Joined
May 7, 2004
Messages
513
Loc.
San Antonio, TX
Looking good Jerry! Now what are your plans for it? Full Width axles, lengthen wheelbase?

I will keep my eyes open on a steering box. Or, you could just lose it all and go full hydro!
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Looking good Jerry! Now what are your plans for it? Full Width axles, lengthen wheelbase?

I will keep my eyes open on a steering box. Or, you could just lose it all and go full hydro!

Full widths and full hydro are the way to go! I wheeled my Bronco once with a 2" lift and 32's and it was a bit tipy for my liking...
 
OP
OP
bigjhoov

bigjhoov

nobody
Joined
Apr 10, 2005
Messages
3,583
Looking good Jerry! Now what are your plans for it? Full Width axles, lengthen wheelbase?

I will keep my eyes open on a steering box. Or, you could just lose it all and go full hydro!

Plan is to keep it cheap, fix it as it breaks. I bought this one is to keep the red '72 nice, kinda like your yellow one. Although, I do have a set of full width's sitting in the shop.;D
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Seems like I remember seeing that one for sale a while back in Louisiana...glad you got it Jerry, will it be at OCBR?
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
Looks good, I guess you gave up on the LUBER trail rig idea;D Oh and please get ride of that big ol' Texas style rear bumper, or at least trim it. ;D
 
Top