• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

I could kill Petronix engineer if I find him

admin

Administrator
Just your friendly, neighborhood webmaster...
Joined
Jan 1, 2001
Messages
38,896
Loc.
Phoenix, AZ
First, if you leave the key on with points and they happen to be closed the coil will burn up. Same with the Petronix, if the magnet is close to the pickup it will burn up. The instructions warn of this problem.
Yep, I was going to say the exact same thing. It's not an issue with Pertronix. It's just a life lesson to learn about older vehicles. Many of us learned the same lesson with points, although it was a cheaper lesson by about $90. ;D
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I tell you what, those old knights of armor sure knew how to polish some metal.
 

Jakedog

Bronco Guru
Joined
Jan 25, 2010
Messages
1,010
I'm no rat, but if anybody from Petronix turns up dead, I'm tellin!
 

Mark

Contributor
Bronco Klutz
Joined
Aug 29, 2003
Messages
5,417
Loc.
NW Indiana
I wonder if he made that telephone call?? %)

Reminds me of a Monty Python skit...
 

BuffDragon

Jr. Member
Joined
Sep 22, 2009
Messages
142
Loc.
CenTex
Use the accessory position on the ignition switch if you are going to sit and listen to tunes. I've replaces the coil on the factory Duraspark twice before the boys learned about that.


which is exactly why my stereo is hardwired to fuses not the key.
so if one of my kids wants to listen to the radio, they just turn it on, rather than go fiddlin with stuff.
a run down battery is much easier than who knows what. I can see my daughter going to turn the key on, bump the starter, and go thru the garage door (or worse), just to listen to the radio in the bronco while dad tinkers on it...
 
OP
OP
Seymourpus

Seymourpus

BANNED
Joined
Dec 11, 2009
Messages
166
Loc.
So Cal
I had to replace my Autolite distributor because Petronix no longer makes an Ignitor which works for it.

So I bought a Petronix distributor that will work in my 72 which originally had points and was made electronic ignition with Ignitor.

What is in the Petronix distributor?

An Ignitor II.

It is way shinier than the dull grey, dual vaccuum Autolite.

One piece oil pan gasket? Or use the new 4 piece cork/rubber one I have?

Should I use sealant? Or vaseline?

Or just whack off on the gasket and hope it sticks?
 

robofig

Sr. Member
Joined
Jan 21, 2008
Messages
452
Why would you support pertronix by buying another won of their products?

I hear the 2010 PT Cruisers are running Pertronix III in their distributors.

You should check it out after you pop a few Zolofs.
 

carter2772

Bronco Guru
Joined
Oct 21, 2008
Messages
1,572
Loc.
Camano Island, Wa
I had to replace my Autolite distributor because Petronix no longer makes an Ignitor which works for it.

So I bought a Petronix distributor that will work in my 72 which originally had points and was made electronic ignition with Ignitor.

What is in the Petronix distributor?

An Ignitor II.

It is way shinier than the dull grey, dual vaccuum Autolite.

One piece oil pan gasket? Or use the new 4 piece cork/rubber one I have?

Should I use sealant? Or vaseline?

Or just whack off on the gasket and hope it sticks?

I dont know about all your questions, but the oil pan gasket I like to use is the one piece rubber with the washers installed so you cant overtighten..
 

rsharpnm

Sr. Member
Joined
May 2, 2005
Messages
712
Loc.
Las Cruces
I had to replace my Autolite distributor because Petronix no longer makes an Ignitor which works for it.

So I bought a Petronix distributor that will work in my 72 which originally had points and was made electronic ignition with Ignitor.

What is in the Petronix distributor?

An Ignitor II.

It is way shinier than the dull grey, dual vaccuum Autolite.

One piece oil pan gasket? Or use the new 4 piece cork/rubber one I have?

Should I use sealant? Or vaseline?

Or just whack off on the gasket and hope it sticks?

Um, yeah... Petronix still makes Ignitors for Autolite distributors...

http://pertronix.carshopinc.com/product_info.php/products_id/31/1281

And Pertronix says in their online catalog that their distributors contain an Ignitor II module in 'em. Shouldn't be a surprise...

If you go with the cork-and-rubber oil pan gasket, I wouldn't use sealant on any of it except for a dab where the rubber ends meet the cork. You can apply a very thin smear, just a film, to help hold the gasket in place, but that's all you need. And be careful not to overtighten the bolts!

I've never tried the 'whacking-off' method... you'll have to let us know how that works out for you %)
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
why would you support pertronix by buying another won of their products?

I hear the 2010 pt cruisers are running pertronix iii in their distributors.

You should check it out after you pop a few zolofs.

lmao!!...;d
 
OP
OP
Seymourpus

Seymourpus

BANNED
Joined
Dec 11, 2009
Messages
166
Loc.
So Cal
I used the 4 piece gasket with some goo on the top.

Read the new story of this fable opera in the Domino link.



Zoloft has a T.

If you mispel a joke it kinda ruinz it.

And expozes stuf.
 
Top