prosys1
Full Member
Here's one for the Gurus........
Some history: 68 EB with a 250 ci six, Dana 30 front with stock but freshly rebuilt drum brakes. Refurbished wheel bearings and I went thru the hub parts too.
While flat towing the rig home from a 4x4 run 280 miles from home, I lost the front passenger tire on the freeway. I was approx 35 miles from camp and all 5 lug nuts were tight. The reason I know this is because when I got back to camp after the 4x4 run, 2 lugs were missing and the other 3 were loose. We took a lug off each back tire and put them on the front.
This was not the first 4x4 trip for the vehicle since I bought it. All lugs were tight before leaving home.
The studs look to have spun allot in the flange. The spline of all studs are gone. The stud holes in the flange are wow'd out but yet the stud won't come out. I even tried putting a lug nut on one of the studs and hit it with a small sledge. Nothing.
The lugs didn't strip off. The aluminum on the studs in the pictures is from the wheel.
I've talked to several car guys and even a fellow EB owner. No one can figure it out.
My Dad came up with one idea. Maybe that side needed left hand thread studs like they use to do in the old days.......
Any constructive help?
Thx.
Some history: 68 EB with a 250 ci six, Dana 30 front with stock but freshly rebuilt drum brakes. Refurbished wheel bearings and I went thru the hub parts too.
While flat towing the rig home from a 4x4 run 280 miles from home, I lost the front passenger tire on the freeway. I was approx 35 miles from camp and all 5 lug nuts were tight. The reason I know this is because when I got back to camp after the 4x4 run, 2 lugs were missing and the other 3 were loose. We took a lug off each back tire and put them on the front.
This was not the first 4x4 trip for the vehicle since I bought it. All lugs were tight before leaving home.
The studs look to have spun allot in the flange. The spline of all studs are gone. The stud holes in the flange are wow'd out but yet the stud won't come out. I even tried putting a lug nut on one of the studs and hit it with a small sledge. Nothing.
The lugs didn't strip off. The aluminum on the studs in the pictures is from the wheel.
I've talked to several car guys and even a fellow EB owner. No one can figure it out.
My Dad came up with one idea. Maybe that side needed left hand thread studs like they use to do in the old days.......
Any constructive help?
Thx.











