• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Prepping my Bumper for Paint

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
Ok so i finally have time to prep and primer down my bumpers tomorrow. What's the best way? My bumpers are new from Protofab so they are bare metal. I bought Acetone, wire brush for surface rust, 180 grits? (not sure if i need that) and Rustoleum Self Etching Primer. Is the Rustoleum self etching primer good or should i go with another brand like Duplicolor or SEM? If you can give me a order of how to prep and the primer that would help a lot. I want to do it right the first time and not worry about it for a couple years;D
Thanks

Forgot to mention i made my decision between two bed liner spray cans:
Rustoleum Bed Liner or DupliColor Bed Liner

Having a really hard time deciding from these two? They both look awesome and perform well based on my research. So those of you guys that have experience with either one let me know how though they are, does it fade fast and etc.

Enough talking for me now;D
 
Last edited:

fetorino

Sr. Member
Joined
Dec 1, 2010
Messages
625
Loc.
Orange, CA
I wouldn't use 180

Ok so i finally have time to prep and primer down my bumpers tomorrow. What's the best way? My bumpers are new from Protofab so they are bare metal. I bought Acetone, 180 grits? (not sure if i need that) and Rustoleum Self Etching Primer. Is the Rustoleum self etching primer good or should i go with another brand like Duplicolor or SEM? If you can give me a order of how to prep and the primer that would help a lot. I want to do it right the first time and not worry about it for a couple years;D
Thanks

The bumpers are bare metal you only need a light buffing to get any surface rust. 180 will leave scratches you have to fill. 400 grit would be my vote. I like the army green etching primer Napa sells.
 
OP
OP
SSDDBRONCO

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
The bumpers are bare metal you only need a light buffing to get any surface rust. 180 will leave scratches you have to fill. 400 grit would be my vote. I like the army green etching primer Napa sells.

ok i read somewhere to use 180 grits so that must be for metal with paint.
 

barronj

Bronco Guru
Joined
Jun 6, 2009
Messages
1,859
Grit is singular,

'cause these are grits

grits-with-butter.jpg


Now I'm hungry for grits.
 

allenfahey

Bronco Guru
Joined
Mar 18, 2004
Messages
2,672
180 will be fine for covering with bed liner. Follow the bedliners directions for the correct primers. 400 grit is good for final sanding prior to basecoat.
 

Chief Master Sergeant

Retired U.S. Air Force
Joined
Nov 6, 2002
Messages
5,222
I just painted my Bailiebilt front bumper this past week. I sanded the light surface rust with fine sandpaper and primed it with Rustoleum self-etching primer. I then painted them with Automotive quality black gloss Rustoleum paint. Not as nice as I had hoped, but looks better that some I have seen. Good luck with this.
 

fetorino

Sr. Member
Joined
Dec 1, 2010
Messages
625
Loc.
Orange, CA
Forgot to mention i made my decision between two bed liner spray cans:
Rustoleum Bed Liner or DupliColor Bed Liner

Having a really hard time deciding from these two? They both look awesome and perform well based on my research. So those of you guys that have experience with either one let me know how though they are, does it fade fast and etc.

Enough talking for me now;D

Did I miss this part on you original post? Bedliner will cover up a lot including 180 grit mayhem. Maybe the coating likes the grooves to bond to. I thought we were talking about prime and paint. I still say 400 is more than enough to knock of any light surface rust but maybe the liner material likes a rougher surface to bond to. I am not familiar with applying the liner products so I'd say my opinion doesn't count on this one.
 
OP
OP
SSDDBRONCO

SSDDBRONCO

Bronco Guru
Joined
Nov 12, 2009
Messages
2,172
Loc.
Los Angeles
Did I miss this part on you original post? Bedliner will cover up a lot including 180 grit mayhem. Maybe the coating likes the grooves to bond to. I thought we were talking about prime and paint. I still say 400 is more than enough to knock of any light surface rust but maybe the liner material likes a rougher surface to bond to. I am not familiar with applying the liner products so I'd say my opinion doesn't count on this one.

No you didnt miss this i edited my post after you commented ;D
 

frenchy

Contributor
Bronco Guru
Joined
Nov 29, 2005
Messages
1,043
When I sprayed liner back when it first came out we used 80 grit on new truck beds. It needed to be course so the liner would stick. If you have a raw bumper make sure there is no rust and use a really good primer. Prep is the key to getting the primer to stick well because if it doesn't adhere well the bedliner will eventually come loose with the primer and peel off pretty easy. for small jobs like bumpers I used spray can liner which worked well but faded pretty easy from the sun. Of course like I said that was back in the day and I'm sure now uv additive has been mixed into the formula. Again prepping is the key to any job of that kind.
frenchy
 
Top