• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Good-bye "Y"

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
I've long been an advocate of the misunderstood "Y" steering linkage. I saw no problem with it especially when Jeep as well as other manufacturers use a similar design. I even went to the trouble and expense, a few years back, to replace the old worn out setup with a whole new "Y". One problem that has reoccured is the toe-in would change and tire wear would result. As it turns out, it takes only a little curb bumping to bend it enough to make the difference. Last weekend I replaced the whole set-up with a three way adjustable kit. I did a peliminary adjustment toe-in adjustment with duct tape, a sharpie, and a tape measure. When I took it to the alignment shop for a final alignment, they said I had it pretty close. Not bad for an ameture huh? I also replaced the pitman arm with a dropped one. This is something I should have done 25 years ago when I did the lift. This eliminated the bump steer problem I've been having after replacing the C4 with the NV3550. It would lurch a bit to the right when the nose dove during the shift. That isn't something you want happening when you have one hand on the shifter.:eek:
Anyway, I now have a greasy "Y" steering setup available if anyone still wants one... %)
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I like the way you talked it up prior to the sales pitch.;)
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
Well I think Hell just got a little colder . . . change your mind on chevy engines and it just might freeze! ;D
 

BluebroncoNC

Bronco Guru
Joined
Jul 30, 2007
Messages
1,768
Loc.
Asheville, NC
Interesting to read... I've been hesitant to change out my "Y" set up, but I think it will be the first "mod" I make after my build is up and running. The "Y" just looks weak to me, even though I won't off road it much, that whole hit a curb and bend it, bugs me to no end. Truck has to steer and has to stop. Have the Brakes and PS handled, just need that Y fixed.
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
I've long been an advocate of the misunderstood "Y" steering linkage. I saw no problem with it especially when Jeep as well as other manufacturers use a similar design. I even went to the trouble and expense, a few years back, to replace the old worn out setup with a whole new "Y". One problem that has reoccured is the toe-in would change and tire wear would result. As it turns out, it takes only a little curb bumping to bend it enough to make the difference. Last weekend I replaced the whole set-up with a three way adjustable kit. I did a peliminary adjustment toe-in adjustment with duct tape, a sharpie, and a tape measure. When I took it to the alignment shop for a final alignment, they said I had it pretty close. Not bad for an ameture huh? I also replaced the pitman arm with a dropped one. This is something I should have done 25 years ago when I did the lift. This eliminated the bump steer problem I've been having after replacing the C4 with the NV3550. It would lurch a bit to the right when the nose dove during the shift. That isn't something you want happening when you have one hand on the shifter.:eek:
Anyway, I now have a greasy "Y" steering setup available if anyone still wants one... %)

what setup did you go with to replace the y?
 

samamarshall

Full Member
Joined
Nov 3, 2008
Messages
244
yeah and what's the cost? I'll probably replace the Y setup on my '77 when I get to that point with my frame off. I've never had issues with it, but who knows with the mild wheeling I've done, and curbs I've hit an accident or purposefully ran over because I can, it's probably bent already and I don't even know it.
 

VT_Don

Sr. Member
Joined
Aug 16, 2001
Messages
365
re: "bump steer problem I've been having after replacing the C4 with the NV3550"

Please explain.
 

stock1970

Bronco Guru
Joined
Apr 2, 2008
Messages
1,793
Loc.
Olathe, Kansas
I had the y steering on my 76 and it was great for the street, but the very first time I took it off road it bent so bad the steering wheel was turned 90 degrees to go straight. I was able to re-adjust for the weekend but after that I went to the stone crusher steering. What a great upgrade for the price.. The only help I needed with the upgrade was drilling out the pit arm.. that is some tuff steel.. but $5 and 5 minutes at a local machine shop and I was rolling with confidence..
 
OP
OP
blubuckaroo

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
re: "bump steer problem I've been having after replacing the C4 with the NV3550"

Please explain.

After the 2.5" lift, the car seemed to drive good but I guess I had two hands on the wheel whenever I hit a bump. Unlike an auto trans, a manual transmission and a slow shift, the nose of the car will dive a bit. When it did, the car would dart to the right. That happens when the drag link is at too steep an angle to the axle. The dropped pitman arm fixed that problem.
 
OP
OP
blubuckaroo

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
what setup did you go with to replace the y?

I bought the setup from Wild Horses:
#2390 tie rod & drag link setup
#1286W dropped pitman arm

The setup bolted right in without any need to ream the knuckles. I thought about making it tie rod over but I wouldn't have gained any clearance because my wheels have quite a positive offset and the tie rod ends are completly inside the rim.
 
OP
OP
blubuckaroo

blubuckaroo

Grease Monkey
Joined
Jun 11, 2007
Messages
11,796
Loc.
Ridgefield WA
Well I think Hell just got a little colder . . . change your mind on chevy engines and it just might freeze! ;D

Ok!
So you'll need your longhandles in hell. I'm really happy with my 302 build and don't plan a Chevy engine transplant anytime soon. I did just put in a Chrysler transmission though.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Well I think Hell just got a little colder . . . change your mind on chevy engines and it just might freeze! ;D

Yes, we are expecting frost in the AZ desert tonight. Is this why?
Could you please put a chevy engine in tonight, maybe even a straight 6, so we can have some snow for Christmas morning? You can take the engine back out after tomorrow.
 

ilovemaui

Bronco Guru
Joined
Jul 10, 2010
Messages
1,651
Loc.
Pacific Moist West
The ruff stuff 1 ton setup was one of the best upgades I've done to my rig. The steering is a 100 times better and everything is adjustable.
 
Top