• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

Boss351

Sr. Member
Joined
Nov 23, 2007
Messages
510
Loc.
Foxboro
I do have a Dana 44 with discs I was thinking of swapping into from the old 30. I also thought about the Mustang II. They wanted upwards of $1700.00 for the kit, but I have been told that you can save big by putting the parts together yourself. Trouble is, I can't seem to find anyone that knows what parts I need to do the job? Anyone out there?

chop the springs 3" in the front and do a axle over in the rear. If going 2wd chop out the gear section in the front and sleeve the 2 sides together. A friend of mine started playing at the dragway w/347 he has this set up in his bronco looks awesome. He's running 10.70 in the quarter.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
chop the springs 3" in the front and do a axle over in the rear. If going 2wd chop out the gear section in the front and sleeve the 2 sides together. A friend of mine started playing at the dragway w/347 he has this set up in his bronco looks awesome. He's running 10.70 in the quarter.

Let's see some pics of that Bronco!:cool:
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I delivered the other 4x4 project to the Bronco Connection Monday, so I hopefully will have some time to play with my other chassis before my second surgery on my OTHER shoulder now. :cry:

Today I took a look at what I will need to do to move the notch back for the rear axle. I want to move the rear axle back to better center it in the rear wheel well. I also decided to make the notch bigger as I don't want to find out down the road that the axle bottoms out like some of my other hotrod buddies have told me. It would make me sick to find out later I should have done something different, so I figured I would try to "get it right the first time". Well actually....the "second time". %)

The pics show the first smaller notch that I welded in on the first attempt. The second notch kit I bought is much higher an longer, but I will trim it in and make it work. I have also accepted the fact that if need be, I will widen the wheel wells to accomodate the larger notch. Of course I will also need to remove and relocate the shock mounts as well as the panhard bar. :p
 

Attachments

  • 100_8071.jpg
    100_8071.jpg
    90.1 KB · Views: 91
  • 100_8070.jpg
    100_8070.jpg
    97.1 KB · Views: 96

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
nice to see that you are working on Broncos again. it is amazing how a break ends up turning into months.
I have started doing some more work on my floor pans.
I'll get some pics up soon.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Yeah...unfortunately I will be out of commission again for awhile. I spoke to my physical therapist today and it sounds like if there are no tears the recovery time will be half the time it took last year.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Ok. So a week after having the OTHER shoulder repaired (pic 1) I am tired of sitting in a recliner (again) and not working on something Bronco related. I bought a CAD program for home so if there is anything that someone needs drawn up maybe I can start doing that soon.

I do have a couple things figured out while I have had time to think. I am going to run a tank in the bed behind the bulkhead (pic 2). That way I dont have to worry about where that rear crossmember ends up being welded back in due to moving the rear axle back the extra 2.5-3".

Also, the tank pictured is 34" wide which gives me some wiggle room if I need to widen out the inner wheel wells to clear the larger notch for the rear axle.

I will also be using a streetrod fuel filler door (pic 3). This would be installed just behind the driver's side door on the upper curved part of the quarter panel.
 

Attachments

  • shoulder 2.jpg
    shoulder 2.jpg
    34.3 KB · Views: 65
  • 11.5 x 11.5 x 34.jpg
    11.5 x 11.5 x 34.jpg
    34.4 KB · Views: 53
  • prod_zm_71.jpg
    prod_zm_71.jpg
    46.9 KB · Views: 60
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
This might give you a better idea what I am looking at doing. Thinking of standing the existing bulkhead straight up to create more storage behind the seats, then make a cover from another bulkhead to hide/separate the tank from the bed.
 

Attachments

  • tank rear.jpg
    tank rear.jpg
    50.8 KB · Views: 71

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
If the bulkhead is straight up the space behind it to the wheel wells would be tight for a tank. Then with the taller notch and center section clearance there may not be much room to work with.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
You are right Bill. If I use the 16 gallon tank shown I think it will fit, if I leave the bulkhead where it is now. With the 40" between the wheel wells and the tank being 34" wide...that leaves me some room to move the wheel wells in to clear the higher notch.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Do you not have room under floor in the original rear area?
I should shut up, cause you are not looking for opinions, but I'll be honest I am not a fan of that idea. "Cosmetically".
IMO it would look better hidden, if you could have something made to fit in the space you end up with under the floor in the rear. Unless... the price is astronomical. (Something I need to investigate myself)


I had a similar size stitches/scar on my back from some melanoma surgery 5 years ago... Surprisingly it has healed up very well. In a few years your scar will hardly be noticeable ;)

Hopefully that takes care of your issues and you will be as good as new!
 
Last edited:
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Yes. I was planning on moving the tank behind the bulkhead. After I move the axle back I won't have room even for the smaller stock main tank. I would have to move the rear crossmember back to accomadate the new position of the axle. I could manipulated things possibly but I figure why go through the headache?
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
I went back in and re-read the post and it sounds like you are planning to use another bulk head or something similar to hide the tank. That should help with appearance end of things.

You could check to see how much room remains, and determine if a tank can be made for the room you have and how many gallons it would hold. I do not know what the cost is opposed to buying the tank you are looking at.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
I'll have to go back and look at what Bill did. I thought he was also thinking about doing some additional mods to the rear is he going to have issues with the tank?
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Cost is the issue. I will run with a Truxedo cover over the bed anyways. The only thing we would need to haul is luggage and/or a cooler.

The tank I found is setup for EFI and much less than having a custom tank made. A custom tank can easily go for over $1000!
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Bill modified the rear crossmember to clear the cover he used on the 9" rear axle. I think he just shaved the front/bottom corner. I don't remember that he posted any pics but his stainless steel tank is very nice.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
I guess I will find out when I get to that point...at least I can keep an eye on your progress, it is always an option for my build.
 
Last edited:
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I suppose that there is some room also to just move the stock rear tank back. I want to move the crossmember the same amount as the rear axle so I am sure the stock tank will no longer fit.

Just something to think about. If a custom tank wasn't so expensive it wouldn't be a problem at all. I'm sure you could still get a custom tank to fit that would hold at least 18 gallons.
 
Top