• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

EFI EEC Mounting Location Ideas - Please Show Me Some Pix

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
Planning my EFI Conversion. Just curious about where/how to mount the EEC in the cabin. I am open to any and all ideas. Post some pix if you got em.

:cool:

Thanks

Rich
 
Last edited:

andyp

Contributor
Sr. Member
Joined
Jan 28, 2011
Messages
898
Planning my EFI Conversion. Just curious about where/how to mount the EEC in the cabin. I am open to any and all ideas. Post some pix if you got em.

:cool:

Thanks

Rich

Mine is placed under the rear seat in my 73 Baja. They built a box that the seat mounts to.
I bought it this way. It's a great spot unless you want to remove your rear seat to load something in the bed.
IMG_4308.jpg

IMG_4348.jpg
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
Wow!
That is really nicely done! I did not think of installing it that far back. I was thinking about under the passenger seat, but I am not keen on drilling a hole in the floor, and I see no other way to easily route a large trunk of wires. I do like the way that they severed the harness and put the wires in that junction board. I think that allows a lot of flexibility when considering computer changes other pinout updates.

Thanks for posting!

R
 

BucknEB

Sr. Member
Joined
Jul 28, 2010
Messages
401
Loc.
Johns Island, SC
I stuffed mine in the small space between the top of the heater box and cowl. I don't have a picture of the underside of the dash, but if you look at the picture you can see where the wire harness enters into the firewall on the passenger side. The EEC sits a couple inches away from the firewall penetration.
77FB929C-4577-426B-9709-419950E4E7B0-1809-000001FB4EB9DF6F_zpsd90c37b9.jpg
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
OK...so it fits up that far? I was thinking that I was going to have to mount it lower than that, and possibly be visible or worse yet kick-able. :eek:

Thanks for this, I am going to look more closely at my options in that area.

Thanks
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
Rich, I mounted mine in Randy's preferred location. I fabbed a mount that bolts to the kick panel.
 

Attachments

  • image.jpg
    image.jpg
    61.5 KB · Views: 220

Rox Crusher

Bronco Guru
Joined
Dec 13, 2008
Messages
2,830
I also "mounted" mine in the space above the heater box / under the cowl / behind the ash tray.

I use the word "mounted" loosely as I wrapped it in water proof insulation and shoved / jammed it up ther and then zip tied it to something.

sorry, no pics
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
I also "mounted" mine in the space above the heater box / under the cowl / behind the ash tray.

I use the word "mounted" loosely as I wrapped it in water proof insulation and shoved / jammed it up ther and then zip tied it to something.

sorry, no pics

Are there any heat dissipation issues with the EEC unit?
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
Rich, I mounted mine in Randy's preferred location. I fabbed a mount that bolts to the kick panel.

Gary,
What is holding that box to the dash? I asked Randy to give me some info on how he mounts the box when he does a conversion and he told me that I should have paid attention when he was showing me his Bronco at Carlisle! Now I know! ;D Thanks for sharing!

R
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Mounted mine on the Passenger side kick panel. Seemed like the best option for what I was doing. I like the location and can get it out if I have to with some Magic. LOL!

I also raised my cowl on the passenger side so that I could get it up higher where you can hardly see it there.
 

Attachments

  • Bronco Build Pics 2011 008.jpg
    Bronco Build Pics 2011 008.jpg
    191 KB · Views: 249
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
Mounted mine on the Passenger side kick panel. Seemed like the best option for what I was doing. I like the location and can get it out if I have to with some Magic. LOL!

I also raised my cowl on the passenger side so that I could get it up higher where you can hardly see it there.

I like this as well. I think to do this right, I will have to take my dash out. Not a big deal, just more work than I thought. However as someone told me a few years ago...If you're going to do it, do it right or not at all.

Does anyone know the part number of that plastic bracket that is depicted in Broncoitis' picture? I think that would be a huge help if I had one of those.

Thanks
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Sporto,

Personally, I got the part from the guy that I got the computer from out of the MUSTANG! I think it is the braket that they used in the Mustangs from 89-93 etc.... Hopefully you can find one or go to a Ford dealer and ask at the parts counter. Ya never know they could possibly have one.

Andy P looks to have the same bracket that he is using under the rear seat to mount his setup!
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
Gary,
What is holding that box to the dash? I asked Randy to give me some info on how he mounts the box when he does a conversion and he told me that I should have paid attention when he was showing me his Bronco at Carlisle! Now I know! ;D Thanks for sharing!

R

I made kind of an L bracket shelf that it sits on and is held on by the bungee cord. This is in my trail rig and I was not concerned about hiding it -more concerned about 100 + heat in August at Rausch! It's pretty much in the same location as Broncoitis' just oriented differently. Good location for the stock harness to reach.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I mounted mine haphazardly under the hood in a tupperware container on my trail truck - stays dry and I can powerwash without worrying.

On my road truck, I want to hide it under the dash...
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
I mounted mine haphazardly under the hood in a tupperware container on my trail truck - stays dry and I can powerwash without worrying.

On my road truck, I want to hide it under the dash...

Not necessarily a Tupperware container, but I was thinking of something like this on the fender.

http://www.ebay.com/itm/Electronics...905?pt=LH_DefaultDomain_0&hash=item1c2f225ac9

Gives me a level of protection from the elements without tearing up the dash...Just a lot of wires to roll up.
 

landshark99

Contributor
Bronco Guru
Joined
Oct 13, 2011
Messages
1,407
Loc.
Montrose, Colorado
mounted mine above the heater under the cowl, fits nicely there and its wrapped on both ends with some closed cell type material to keep it from moving. Not much space left for it to move anyway so not too concerned about vibration. I dont think the heat will really affect it that much, but we will see!

Not very convenient if you need to tweak it, but if you dont plan on messing around with it then its a great spot. If you need to remove or mess around with it, best way for me was to just drop the heater also with it mounted here you never see the EEC or the wiring inside the truck.

I dont really have any pics of it in place. Might need to get some but here is where the wiring goes through the firewall and the wires/EEC hanging off inside...

IMG_1435.JPG


IMG_1437.JPG
 
OP
OP
Sporto

Sporto

Sr. Member
Joined
Oct 10, 2005
Messages
923
So no mounting bracket needed if mounted above the heater. It is just stuffed up there and held in place with a padding of some kind. I suppose that it is best to get it up and running first, and then spend the time finalizing the EEC installation.

;)
 
Top