• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Yeah I have watched the videos a few times its general information, they send a one page instruction for the initial setup. The installation video is the same as what is on the youtube videos. The initial setup is the issue as once you start your committed.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
So is there a way that you could show me how they incorporated the detent pin? That sounds like something that I would like to have on my install. I am back to work today after living in my recliner (again) for the last 7 weeks. It finally broke this time so I have to get to work! :cool:
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
here is the ballspring photos ImageUploadedByTapatalk1362955078.486319.jpg ImageUploadedByTapatalk1362955089.863802.jpg ImageUploadedByTapatalk1362955097.681068.jpg ImageUploadedByTapatalk1362955109.414604.jpg
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Here is the Autoloc stuff I bought awhile ago. If you can see there is a tube that is welded into place for a wire to pass through. (the "built in wire loom" feature) I think I can tack a tube with the detent onto thoses and duplicate the same as what you have.

I like the Hagan stuff alot, but I already shelled out over $700 for everything including the latches, door poppers, electronics, etc. I also am thinking that suiciding the doors would be almost the same as just replacing the hinges towards the front? Or am I not thinking this through? %)
 

Attachments

  • AUTOLOC 1.jpg
    AUTOLOC 1.jpg
    90.2 KB · Views: 77
  • AUTOLOC 2.jpg
    AUTOLOC 2.jpg
    82.1 KB · Views: 79
  • AUTOLOC 3.jpg
    AUTOLOC 3.jpg
    94.3 KB · Views: 88

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I keep going over this myself. To suicide the doors you have to cut some kind of access into the area behind the door post, and you will not have access to the out side edges of things because of the quarter panels. Is it needed ? probably not. Just doing the hidden hinge thing you have access under the front fender to do the welding. Also with just going hidden you dont need new latches and door mechanics, the stock stuff works. I am leaning more toward a stock looking only dropped bronco than more of a custom one like the blue one from the good guys show.

We shall see how this all works out.

I just ran a tape line down the side of the truck to check panel alignment along with positioning the front fenders for the body trim. l was shocked (not really) that the trim is higher at the rear tailgate area than at the door post. Quite a mess, I guess I will align the door gap and fender gap and not worry about the trim at this time. leveling the trim I guess will come afterward but before paint.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I keep thinking the suicide effect would only be noticed with the door open anyways. Now that you pointed it out, it wouldn't be that bad of an install with the fenders off. It's probably not worth the extra effort going back through the bed area, especially if I am going to dedicate that area behind the bulkhead to my fuel tank.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
Well my latest version of the inner fenders have been painted and screwed in place for now. Some final adjustments and we will weld them in place. ImageUploadedByTapatalk1366601600.136737.jpg ImageUploadedByTapatalk1366601634.649750.jpg ImageUploadedByTapatalk1366601656.544611.jpg . battery relocation, starter solenoid relocation, hidden hinges, bed removal, new c notch. I guess a few more years.
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Nice to see you guys moving forward on the Broncos...
Bill it looks like you may be able to drive it again this summer!
edit-(Whoops I see a few more years?)
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I could put the radiator in and bolt down the fenders and drive it. I will drive it again this summer, Right now it needs front fender alignment and then the door hinges. ImageUploadedByTapatalk1368374922.631947.jpg I'm moving the battery to the bed area as after redoing the front inner fenders there is just no room. Adjusting door gaps is a pain .
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Well I have gone through another surgery (other shoulder), and after this weekend graduation is over. Hoping the other resto is done this month or next.

My buddy is finishing up his '68 fastback in time for Deadwood, and then we will work on the frame again and get the body on. I am getting way more anxious to get the hotrod going than the 4x4 now!
 

77bronco_ed

Bronco Guru
Joined
Jul 3, 2004
Messages
1,793
Well I have gone through another surgery (other shoulder), and after this weekend graduation is over. Hoping the other resto is done this month or next.

My buddy is finishing up his '68 fastback in time for Deadwood, and then we will work on the frame again and get the body on. I am getting way more anxious to get the hotrod going than the 4x4 now!

My daughter just got her masters last weekend...
Good get that thing movin! we are anxious ;)

My goal for the summer:
engine trans mount and get the body tub back on the frame. (have to build the mounting points)

Bill great... Glad that you will be driving this summer and then start a few of those projects that you can finish over the next winter!
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I rolled it out, put the radiator back in, and relocated the battery to the bed. ImageUploadedByTapatalk1369802808.978033.jpg
 

j.r.nice

Bronco Guru
Joined
Feb 8, 2004
Messages
1,615
Here is the Autoloc stuff I bought awhile ago. If you can see there is a tube that is welded into place for a wire to pass through. (the "built in wire loom" feature) I think I can tack a tube with the detent onto thoses and duplicate the same as what you have.

I like the Hagan stuff alot, but I already shelled out over $700 for everything including the latches, door poppers, electronics, etc. I also am thinking that suiciding the doors would be almost the same as just replacing the hinges towards the front? Or am I not thinking this through? %)

Im sorry, I haven't been here for a while and missed some posts. Just an FYI, Autoloc stuff is flat junk. They are VERY picky and critical of any "warranty" claims. I bought some linear actuators from them. They sent a mis-matched set, and then refused to make it right when they fell apart.

Nice build!
 

01Dudley

Sr. Member
Joined
Jul 16, 2012
Messages
974
Loc.
Knoxville
Gotta love the HOFFMAN GROUP! They basically just buy nice American Made stuff and sent it over to China to be copied. They are picky on warranty because they can't get it replaced from the China manufacturer.



Im sorry, I haven't been here for a while and missed some posts. Just an FYI, Autoloc stuff is flat junk. They are VERY picky and critical of any "warranty" claims. I bought some linear actuators from them. They sent a mis-matched set, and then refused to make it right when they fell apart.

Nice build!
 
Top