• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What inline High Pressure fuel pump?

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
I'm currently running a carter pump for an 89 F150 or Bronco. I need a pump with AN fittings or that can at least be adapted to AN. I have found several universal type pumps with AN fittings but I would like a Pump that I can be replaced at a regular parts store if needed. I have only found one adaptor for my current pump but nobody answers the phone when I try to call and order it.
Does such a pump exist?
 

70_Steve

Old Guy
Joined
Dec 13, 2002
Messages
8,317
I used an E2000 pump. Basically the same external pump as the ones used on F150s. They have a wierd 5/16 fitting on the ends but there are AN quick connect fittings to match. It's been 3 years or so since I did mine, and can't remember what the fittings are called... I'll take a quick look and see if I can find them...


Edit: Pretty sure I used Russel fittings. Found this page that shows the type connection I had on the pump, but I'm pretty sure I had 5/16" connections and I don't see a 5/16 female connector on their page.

http://www.russellperformance.com/mc/adapt_fit/fuel-efi.shtml
 

Attachments

  • pushon adapters.JPG
    pushon adapters.JPG
    35.8 KB · Views: 62
Last edited:
OP
OP
casadejohnson

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
I used an E2000 pump. Basically the same external pump as the ones used on F150s. They have a wierd 5/16 fitting on the ends but there are AN quick connect fittings to match. It's been 3 years or so since I did mine, and can't remember what the fittings are called... I'll take a quick look and see if I can find them...


Edit: Pretty sure I used Russel fittings. Found this page that shows the type connection I had on the pump, but I'm pretty sure I had 5/16" connections and I don't see a 5/16 female connector on their page.

http://www.russellperformance.com/mc/adapt_fit/fuel-efi.shtml

I have the Russell fittings you are showing but the pump has the retaining ring so close the body that the clip on the adaptor won't fit. Ill post a photo of what I'm talking about when I get home.
 
OP
OP
casadejohnson

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
You can use 5/16" compression to -6 adapters.

Compression fittings is probably what I'm going have to do. I wasn't hundred percent confident that the compression fittings would work with the high-pressure system. I assume that's what you use? I like the idea of quick connects for ease of changing the pump But it sounds like it's more hassle than it's worth.
 

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
A universal inline 255lph Walbro pump will make you happy. The ends are 10mm, the -6 AN adapters are readily available, and there is a check valve adapter that is pretty much awesome. I used to run the inline setup for a ling time, but the 23 gallon tank with the pump inside changed my outlook on inline pumps.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
Compression fittings is probably what I'm going have to do. I wasn't hundred percent confident that the compression fittings would work with the high-pressure system. I assume that's what you use? I like the idea of quick connects for ease of changing the pump But it sounds like it's more hassle than it's worth.

I do use them on the HP side. No leaks yet.
 
OP
OP
casadejohnson

casadejohnson

Bronco Alchemist
Joined
Jan 21, 2005
Messages
3,587
A universal inline 255lph Walbro pump will make you happy. The ends are 10mm, the -6 AN adapters are readily available, and there is a check valve adapter that is pretty much awesome. I used to run the inline setup for a ling time, but the 23 gallon tank with the pump inside changed my outlook on inline pumps.

Some day when the Idle Cash Fairy visits me, I will remove my current 23 gallon tank and move it over to my 66. Then, I can get another 23 Gallon tank with the pump in the tank. Until that day comes, I'll be running an inline pump.
 

jw0747

Bronco Guru
Joined
Nov 22, 2006
Messages
2,434
Loc.
San Antonio, TX
be sure to mount your hp pump away from all heat sources. they're finicky. my E2000 was mounted on crossmember above rear diff and it was constantly overheating. changed to in-tank pump and no more problems. gas keeps it cool.
 
Top