• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Issues with high torque mini starters?

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
Hey all....

I purchased and installed a new high torque mini starter for my C4 from one of the Bronco vendors. About 1 month of usage and its dead. I probably used it less than 50 times.

Anyone else have similar issues? The vendor was awesome as usual and is replacing it for free.

I'm nervous now to the point of wanting to carry a backup.
 

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
Must have just got a bad one, I have been using for years on several cars and never had an issue. Thumbs up for the vendor standing behind their product.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
I sometimes worry about it because if it goes out while I'm 2,800 miles from civilization, I'll be walking. I'll take the starter apart and try to fix it before leaving though. Mine came from a wrecking yard and I haven't had any problems with it in 35,000 miles. Maybe I'll pickup a spare.
 

TN1776

Bronco Guru
Joined
Oct 24, 2006
Messages
2,632
You probably just had a bad one. Is it an OEM mini starter or an aftermarket variety? OEMs have been using the compact starters for years, they are a proven piece in my opinion.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
I have used various different aftermarket starters. Never an issue. Sometimes a bum one gets out. Part of the economics of making them affordable.
 

ransil

Bronco Guru
Joined
Sep 6, 2003
Messages
8,138
What's so special about the vendors starter?
shop local and get something off the shelf so you have easy access to a replacement.
 
OP
OP
airbur

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
What's so special about the vendors starter?
shop local and get something off the shelf so you have easy access to a replacement.

Does anyone have a brand/part number of a mini-started that will work with the 351W/C4 Auto 164 tooth and that can be bought locally? (O'Reilly, Advance, Napa).
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,111
Flexplate tooth count doesn't matter. The bellhousing locates the starter to match the tooth count.

Ford starters were typically known for being different between automatics and standard transmissions. But when Ford started running the T5 in the mustangs they changed things and used the same starter that the automatics use in the stick shifts.

It doesn't happen as much now, but we would get someone looking for a starter that would work with there new engine. Press them and find they took a 5.0 mustang with the 157 tooth flywheel (autos are different with 164 tooth flexplate) and the original mustang clutch and put it into the Bronco bellhousing that spaces the starter for the 164 tooth flywheel. starter would not touch the flywheel. They were never too happy when we told them they needed to replace the flywheel and clutch, especially when they already bought the new performance mustang clutch.
 
OP
OP
airbur

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
Flexplate tooth count doesn't matter. The bellhousing locates the starter to match the tooth count.

Ford starters were typically known for being different between automatics and standard transmissions. But when Ford started running the T5 in the mustangs they changed things and used the same starter that the automatics use in the stick shifts.

It doesn't happen as much now, but we would get someone looking for a starter that would work with there new engine. Press them and find they took a 5.0 mustang with the 157 tooth flywheel (autos are different with 164 tooth flexplate) and the original mustang clutch and put it into the Bronco bellhousing that spaces the starter for the 164 tooth flywheel. starter would not touch the flywheel. They were never too happy when we told them they needed to replace the flywheel and clutch, especially when they already bought the new performance mustang clutch.

Thanks! I'm going to pick that one up today from Advance and use the warranty replacement as my backup:)
 

357Bronco

Bronco Guru
Joined
Oct 13, 2006
Messages
1,001
Loc.
New Hampsha
I had nothing but problems with an expensive Power Master starter a couple years ago. Took it out and replaced with a new NAPA '92-'95 5.0 Mustang starter, same one used for all 5.0, 5.8 and 4.9's from about '92- '97. Spins my 11.5-1 compression 351W all day at the drags with no problems. Live and learn. And it was less then half the cost of my "racing starter".%)
 

Lmfp

Bronco Guru
Joined
Jun 28, 2011
Messages
1,496
Loc.
Lake Charles, LA
The po of my bronco had a mini starter on mine when i bought it. Dunno i he put the wrong one but it never caught roght and tore up my flex plate. I just went back to the 30ibs factory starter with lifetime replacement.
 
OP
OP
airbur

airbur

Bronco Guru
Joined
Jun 3, 2008
Messages
2,763
Loc.
Castle Pines, CO
Well, after intensive, extensive, and thorough troubleshooting and testing with a new starter from Advance, I discovered the highly elusive cause.

The big red cable that connects the battery to the starter was loose on the post.%)

I'll be returning the new starter to the vendor and keeping my old one as backup.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
That loose connection is the high resistance/not enough current part.
 

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
The only problem I've personally seen with the mini starter is someone broke a gear off in the planetaries. Builder said that usually only happens when the engine kicks back with the bendix still engaged against the ring gear.
 
Top