• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dating an engine.

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
Quick question. Is there any way to date an engine? I'm have timing chain cover and fuel pump eccentric issues and I hear it might be something to do with a difference in timing chain covers from my '69 to the new(er) motor.
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
Cast on the block is I D just behind the starter....V8
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
first letter =decade..next no. = year. C would be 60's...9 would be '69....etc

B=50's. C=60's D=70's E=80's

NONUMBER would be the year of that decade
 

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
I guess to answer the question though does it have the stock timing cover or been swapped out. D shaped water passages or round D shape is pre-94 for most and round is 94 and up. 94 up don't have a eccentric the pre-94 had two different eccentrics one piece and the two piece and I might be wrong but I think the two piece ended in 1970. Hope this helps.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
To date the engine you have to be sure it has all the original parts to start with. Otherwise the best you can hope to do is date the parts.

One thing about the date codes. Those are the engineering change revisions. If the part didn't change for a few years the date code didn't change. So if a part has a D3 (1973) it simply means it is no older then '73 but could be newer such as '75.
 
OP
OP
Okie69

Okie69

Contributor
Sr. Member
Joined
Nov 28, 2011
Messages
842
I guess I'm just hoping to date the block. To be specific my fuel pump eccentric is hitting my timing chain cover.

I got a new (to me) long block and switched all the parts off of my '69 motor.
 
Top