• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Firewall wiring grommets

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
I had mentioned using these once before, I just thought I'd start a thread with pics of them installed. Application is for a '48 to '59 F100. The reason I like Themis because the grommets on a centech harness sucks and won't stay in the firewall. I just installed these today. Plus there's extra holes in the grommet you can drill to pass extra wiring through if needed.

Part numbers
1A-14603-A for the rubber
https://secure435.hostgator.com/~dl...DIUM/1A-14603-B%20~WLOGO.JPG&i=1A-14603-B&s=0
8A-14608 for the ring
https://secure435.hostgator.com/~dl...ROMMET%20RETAINER%20~WLOGO.JPG&i=8A-14608&s=0

45e72dcf-29d3-ed1a.jpg


45e72dcf-29ef-ea40.jpg
 
Last edited:

Tuck

Sr. Member
Joined
Jul 25, 2001
Messages
947
Did you have to cut the Centech grommets off? I agree they don't stay in...it's worse when you have the tub lined.
 
OP
OP
73stallion

73stallion

Bronco Guru
Joined
Mar 5, 2004
Messages
16,786
Loc.
Eugene, OR
yes you cut off the stock centech grommets. it's real easy to cut them off, just cut into one side and split it. have to do the same to the new grommet to install them.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Thanks for posting up the numbers and pics.
Do you cut larger holes in them for the harnesses, or were the large holes already the correct size for what you needed?

Paul
 

Pestanza

Jr. Member
Joined
Jun 2, 2011
Messages
59
Loc.
Sunnyvale
The links are dead, any idea where to get something like this nowadays? Same problem ove here, the centech grommets are useless.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Google the part numbers and several sources come up. Sure glad Stallion added the numbers!
The first one, oddly enough is Dennis Carpenter, and their link is dead too! But a couple of the others work.

I still say you should make your own sheet metal panels to cover the stock holes and accept the Centech grommet.
Would look slick I'm sure.

Just sayin'... ;)

Paul
 

Tedster100

Chairman of the Bored
Joined
Aug 25, 2010
Messages
1,762
I still say you should make your own sheet metal panels to cover the stock holes and accept the Centech grommet.
Would look slick I'm sure.
Paul

That's what I did because the fiberglass is too thick for most any grommet. If you look closely, there is about 3/4 of a stop sign bolted to the firewall to accept the grommets. The aluminium is perfect, easy to bend, cut and drill and it won't rust. The Centech grommets are also a metric size or something, had to grind the holes a bit to get to the correct diameter after using the closest size hole saw.
 

Attachments

  • PA170006.jpg
    PA170006.jpg
    101.1 KB · Views: 226
  • PA170007.jpg
    PA170007.jpg
    91.8 KB · Views: 197
  • PC100107.jpg
    PC100107.jpg
    135.8 KB · Views: 203

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
Still like these better, IF, for whatever reason, the body has to come off again. Plus they look cool;D

Jim W.
 

Attachments

  • Plugs.jpg
    Plugs.jpg
    69.1 KB · Views: 240
  • DSC00333.jpg
    DSC00333.jpg
    131.5 KB · Views: 200
  • DSC00334.jpg
    DSC00334.jpg
    128.7 KB · Views: 178
  • DSC00346.jpg
    DSC00346.jpg
    150.6 KB · Views: 227

akforsyth

Contributor
Sr. Member
Joined
Jun 17, 2004
Messages
360
Still like these better, IF, for whatever reason, the body has to come off again. Plus they look cool;D

Jim W.

Wow, those are slick, but do they seal to keep water put and prevent corrosion?
 

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
Absolutely, they're Mil. Spec. aircraft connectors. Not the cheapest things in the market, but you get what you pay for.

Jim W.
 

broncoitis

Bronco Guru
Joined
Jul 23, 2010
Messages
4,449
Absolutely, they're Mil. Spec. aircraft connectors. Not the cheapest things in the market, but you get what you pay for.

Jim W.

Those are pretty sweet connectors! Any info on them for anyone interested?
 

dave67fd

Bronco Guru
Joined
Sep 24, 2010
Messages
2,864
They are some of the best in the buisness but only for those who know how to solder and crimp "properly".
You can get them at most of the popular electronic parts distributors.
There are many different versions, styles, materials, configurations etc... available.
Try Mouser Electronics or Digikey to name a couple. My company uses many versions/manuf.. We use alot of the AMP circular connectors which are a much more cost effective solution if they fit your app.

http://www.mouser.com/Connectors/_/N-5g3y/

http://www.mouser.com/Connectors/Circular-Connectors/_/N-76q5a/
 

jim3326

Bronco Guru
Joined
Jul 12, 2010
Messages
1,781
Loc.
Appleturkey
Jim

Your such a tease.;D Would you be willing to throw out the part numbers you used and an explanation of how you chose them?

Thanks

You don't want much, do you?;D;D;D

I might be able to figure out what I got, don't think I still have a receipt. I counted the wires in the harness and separated them by size to figure out which one to get. If I had to do it again I would go with more connectors with fewer wires. Separate it by the system (lights, injectors...etc.). It was a real pain getting them all lined up correctly.

The big one is.... 97-3100A-32-7S & 97-3106-32-7P, small is.... 97-3100-20-14S & 97-3106-20-14P

Then you get to the strain relief housings.
Jim W.
 

Attachments

  • Plugs.jpg
    Plugs.jpg
    69.1 KB · Views: 78
Last edited:
Top